Square D 9001AS2 Push Button The Square D 9001AS2 is a push button with a current rating of 10 Amps and a voltage rating of 600VAC. It features with lever actuator type. The 9001AS2 has a panel mounting type and it is used for petrochemical, wastewater treatment, metallurgy, automotive, machine tool, crane and hoist, food and beverage, industrial, material handling applications.
Ghi chú Nghiên cứu
1. What this is
9001AS2 is a Square D 9001 command device.
2. Part-number decode
- Series: Square D 9001
- Type: command switch
- Panel cutout: 30.5mm
3. Compatibility & ordering
Square D (Schneider's US brand) makes the Class 9001 30mm heavy-duty command switches and Harmony devices. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The Square D product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.
5. Sources
- Square D product catalog (se.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
Nguồn
- Square D — 9001AS2 — se.com
Thông số kỹ thuật
|
Device class
|
command switch
|
|
Enriched by
|
squared-decoder-2026-08-12
|
|
Manufacturer series
|
9001
|
|
Panel cutout
|
30.5mm
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Push Button
|
|
Series description
|
Square D Class 9001 30mm command device / accessory
|
|
Shopify id
|
8462101184825
|
|
Vendor
|
Square D
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Kích thước
Khắc phục sự cố
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Thông số kỹ thuật nhanh
- Device class
- command switch
- Enriched by
- squared-decoder-2026-08-12
- Manufacturer series
- 9001
- Panel cutout
- 30.5mm
- Pn status
- decoded-partial