9001AS2

Aktywny

Square D 9001AS2 Push Button

Square D 9001AS2 Push Button The Square D 9001AS2 is a push button with a current rating of 10 Amps and a voltage rating of 600VAC. It features with lever actuator type. The 9001AS2 has a panel mounting type and it is used for petrochemical, wastewater treatment, metallurgy, automotive, machine tool, crane and hoist, food and beverage, industrial, material handling applications.

Notatki Badawcze

1. What this is

9001AS2 is a Square D 9001 command device.

2. Part-number decode

  • Series: Square D 9001
  • Type: command switch
  • Panel cutout: 30.5mm

3. Compatibility & ordering

Square D (Schneider's US brand) makes the Class 9001 30mm heavy-duty command switches and Harmony devices. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The Square D product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • Square D product catalog (se.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Źródło
  1. Square D — 9001AS2 — se.com

Specyfikacje

Device class
command switch
Enriched by
squared-decoder-2026-08-12
Manufacturer series
9001
Panel cutout
30.5mm
Pn status
decoded-partial
Product type
Push Button
Series description
Square D Class 9001 30mm command device / accessory
Shopify id
8462101184825
Vendor
Square D

Skrócona Instrukcja Montażu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wymiary

Rozwiązywanie Problemów

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Gdzie Kupić

Przedział cenowy

$319.0 — $319.0

from 1 seller in US dollars

Skrócone Specyfikacje

Device class
command switch
Enriched by
squared-decoder-2026-08-12
Manufacturer series
9001
Panel cutout
30.5mm
Pn status
decoded-partial