3SB22031AC01

Hoạt động

Siemens 3SB22031AC01

Siemens 3SB22031AC01 — Siemens 3SB22031AC01

Emergency Stop Switches / E-Stop Switches PUSHBUTTON,MAINTAINED,TW REL,RED,NON IL

Ghi chú Nghiên cứu

1. What this is

3SB22031AC01 is a Siemens 3SB2 16mm modular command switch (compact command/signalling device).

2. Part-number decode

  • Series: 3SB2
  • Panel cutout: 16mm
  • Construction: modular (operator + holder + contact/lamp modules are separate parts)

3. Compatibility & ordering

Siemens 16mm command switches are modular IEC-style panel devices. Match by size, function (pushbutton/selector/indicator/E-stop), color, illumination, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Siemens series is decoded from the part number (grounded in the Siemens LV1 catalog and distributor listings). The detailed configuration (exact function, color, contact arrangement, voltage) is encoded in the full order code and is left to the Siemens datasheet rather than guessed here. Flagged decoded-partial.

5. Sources

  • Siemens LV1 catalog / SIRIUS ACT (3SU) & Class 52 selection data (siemens.com)
  • Siemens Industry Mall — search the exact part/material number
  • Distributor listing (Mouser / Newark) — search the exact part number

Nguồn
  1. Siemens Industry Mall — 3SB22031AC01 — siemens.com

Thông số kỹ thuật

Device class
command-switch
Enriched by
siemens-decoder-2026-08-12
Lead time
14 Days
Manufacturer series
3SB2
Modular
true
Mouser part number
982-3SB22031AC01
Panel cutout
16mm
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
Siemens 3SB2 16mm modular command switch (compact command/signalling device)

Hướng Dẫn Cài Đặt Nhanh

Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

Kích thước

Khắc phục sự cố

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

Hình ảnh & Bản vẽ

Hình ảnh: mouser.com

Thông số kỹ thuật nhanh

Device class
command-switch
Enriched by
siemens-decoder-2026-08-12
Lead time
14 Days
Manufacturer series
3SB2
Modular
true