Sanwa OBSN-24 screw in japanese arcade pushbutton. Ideal for wooden panels with up to 8mm base width.
Thông số kỹ thuật
|
Arcade express id
|
482
|
|
Device type
|
Sanwa OBSN-24 24mm screw-in arcade button (screw-in variant of OBSF-24, for thick panels)
|
|
Diameter
|
24mm
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Built-in Sanwa microswitch
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Screw-in (threaded barrel + nut)
|
|
Reference pn
|
OBSN-24 (AX-482 is an Arcade Express catalog ID)
|
|
Weight kg
|
0.020000
|
Hướng Dẫn Cài Đặt Nhanh
Mounting: Snap-in buttons push into a 24mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Kích thước
Khắc phục sự cố
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Thông số kỹ thuật nhanh
- Arcade express id
- 482
- Device type
- Sanwa OBSN-24 24mm screw-in arcade button (screw-in variant of OBSF-24, for thick panels)
- Diameter
- 24mm
- Microswitch Type
- Built-in Sanwa microswitch
- Mounting Type
- Screw-in (threaded barrel + nut)
