Sanwa OBSN-24 screw in japanese arcade pushbutton. Ideal for wooden panels with up to 8mm base width.
Spezifikationen
|
Arcade express id
|
482
|
|
Weight kg
|
0.020000
|
Installationskurzanleitung
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Abmessungen
Fehlerbehebung
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Kurzspezifikationen
- Arcade express id
- 482
- Weight kg
- 0.020000
