Gateron · Pro 3.0 Dòng sản phẩm

KS-3X-MILKY-Y

Hoạt động

Gateron Pro 3.0 Yellow Linear

Gateron Pro 3.0 Dòng sản phẩm Introduced circa 2023

Gateron Pro 3.0 Yellow — factory-lubed with improved mold tolerances.

Ứng Dụng Phổ Biến

Third generation of the beloved Yellow. Tighter tolerances eliminate stem wobble. Factory lube is actually good now — no need for DIY lubing. The default recommendation for anyone building a custom keyboard in 2024+.

Thông số kỹ thuật

Actuation Force
50g
Color
Yellow stem
Mechanical Life
80,000,000 cycles
Travel Distance
2mm actuation, 4mm total

Hướng Dẫn Cài Đặt Nhanh

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Kích thước

Khắc phục sự cố

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Nơi Mua Hàng

Dải giá

$83.98 — $86.86

từ 2 nhà phân phối

Thông số kỹ thuật nhanh

Actuation Force
50g
Color
Yellow stem
Mechanical Life
80,000,000 cycles
Travel Distance
2mm actuation, 4mm total

Những Đánh Giá Từ Khách Hàng

+

“Third generation of the beloved Yellow. Tighter tolerances eliminate stem wobble. Factory lube is actually good now — no need for DIY lubing. The default recommendation for anyone building a custom ke”

Reddit r/MechanicalKeyboards 8 lượt bình chọn Xem ren