Gateron · Pro 3.0 Seria

KS-3X-MILKY-Y

Aktywny

Gateron Pro 3.0 Yellow Linear

Gateron Pro 3.0 Seria Introduced circa 2023

Gateron Pro 3.0 Yellow — factory-lubed with improved mold tolerances.

Typowe Zastosowania

Third generation of the beloved Yellow. Tighter tolerances eliminate stem wobble. Factory lube is actually good now — no need for DIY lubing. The default recommendation for anyone building a custom keyboard in 2024+.

Specyfikacje

Actuation Force
50g
Color
Yellow stem
Mechanical Life
80,000,000 cycles
Travel Distance
2mm actuation, 4mm total

Skrócona Instrukcja Montażu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wymiary

Rozwiązywanie Problemów

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Gdzie Kupić

Przedział cenowy

$83.98 — $86.86

u 2 dystrybutorów

Skrócone Specyfikacje

Actuation Force
50g
Color
Yellow stem
Mechanical Life
80,000,000 cycles
Travel Distance
2mm actuation, 4mm total

Co Mówią Użytkownicy

+

“Third generation of the beloved Yellow. Tighter tolerances eliminate stem wobble. Factory lube is actually good now — no need for DIY lubing. The default recommendation for anyone building a custom ke”

Reddit r/MechanicalKeyboards 8 głosy za Zobacz wątek →