M22-L-Y
Hoạt động22mm Yellow LED Indicator Light
Eaton M22 yellow/amber LED indicator light.
Ứng Dụng Phổ Biến
Yellow/amber = warning per IEC 60204-1. Indicates abnormal but non-critical condition — overtemp warning, filter dirty, level low. Completes the traffic light cluster: green (OK), yellow (warning), red (fault).
Thông số kỹ thuật
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Yellow
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Illuminated
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V AC/DC
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
M22
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22.5mm. Insert from the front, secure with mounting nut.
LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.
Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.
Kích thước
Khắc phục sự cố
Light is dim or flickering
Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).
Light doesn't turn on
Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.
Nơi Mua Hàng
Dải giá
$7.19 — $25.65
từ 3 nhà phân phối
Thông số kỹ thuật nhanh
- Certifications
- UL, CSA, CE
- Color
- Yellow
- Cutout Diameter
- 22.5mm
- Illumination
- Illuminated
- LED Voltage
- 24V AC/DC
Những Đánh Giá Từ Khách Hàng
“Yellow/amber = warning per IEC 60204-1. Indicates abnormal but non-critical condition — overtemp warning, filter dirty, level low. Completes the traffic light cluster: green (OK), ”