CS-JELLY-BLACK
Hoạt độngAkko CS Jelly Black Linear 50g
Akko Jelly Black — premium linear with UPE stem material.
Ứng Dụng Phổ Biến
Akko Jelly series uses UPE (ultra-high molecular weight polyethylene) stem — self-lubricating like POM but with a different sound signature. Deeper thock than standard nylon. At $0.25/switch its the cheapest premium-material switch available.
Thông số kỹ thuật
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
50g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Black stem, translucent housing
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
80,000,000 cycles
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2mm actuation, 4mm total
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Kích thước
Khắc phục sự cố
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Nơi Mua Hàng
Dải giá
$67.83 — $94.71
từ 2 nhà phân phối
Thông số kỹ thuật nhanh
- Actuation Force
- 50g
- Color
- Black stem, translucent housing
- Mechanical Life
- 80,000,000 cycles
- Travel Distance
- 2mm actuation, 4mm total
Những Đánh Giá Từ Khách Hàng
“Akko Jelly series uses UPE (ultra-high molecular weight polyethylene) stem — self-lubricating like POM but with a different sound signature. Deeper thock than standard nylon. At $0.25/switch its the c”
Tìm Hiểu Thêm
Thêm sản phẩm từ Akko
Akko
BOTANY 38G LINEAR PCB MOUNT SWITCHES 45 PACK
Akko Botany 38g Linear PCB Mount Switches 45 pack
Akko
CREAMY BLACK PRO 55G LINEAR PCB MOUNT SWITCHES 45 PACK
Akko Creamy Black Pro 55g Linear PCB Mount Switches 45 Pack
Akko
CREAMY BLUE PRO V3 45G TACTILE PCB MOUNT SWITCHES 45 PACK
Akko Creamy Blue Pro V3 45g Tactile PCB Mount Switches 45 Pack