CS-JELLY-BLACK
AtivoAkko CS Jelly Black Linear 50g
Akko Jelly Black — premium linear with UPE stem material.
Aplicações comuns
Akko Jelly series uses UPE (ultra-high molecular weight polyethylene) stem — self-lubricating like POM but with a different sound signature. Deeper thock than standard nylon. At $0.25/switch its the cheapest premium-material switch available.
Especificações
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
50g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Black stem, translucent housing
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
80,000,000 cycles
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2mm actuation, 4mm total
|
Referência rápida de instalação
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensões
Solução de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Onde comprar
Faixa de preço
$67.83 — $94.71
em 2 distribuidores
Especificações rápidas
- Actuation Force
- 50g
- Color
- Black stem, translucent housing
- Mechanical Life
- 80,000,000 cycles
- Travel Distance
- 2mm actuation, 4mm total
O que os usuários dizem
“Akko Jelly series uses UPE (ultra-high molecular weight polyethylene) stem — self-lubricating like POM but with a different sound signature. Deeper thock than standard nylon. At $0.25/switch its the c”
Saiba mais
Graus de proteção IP explicados
O que IP65, IP66, IP67, IP69K significam para sua aplicação
Guia 22mm vs. 30mm
Qual tamanho de recorte de painel você precisa?
Blocos de contato: NO vs. NC
Como escolher e conectar blocos de contato
Ferramenta localizador de botões
Encontre o botão certo por tipo, tamanho e cor