Tuya · TS004x Seri

TS0043

Aktif

Tuya Zigbee Scene Button 3-Gang

Tuya TS004x Seri Introduced circa 2022

Tuya Zigbee 3-button scene controller.

Yaygın Uygulamalar

Three buttons, 9 actions. Mid-size between the 2-gang and 4-gang. Popular for 3-zone lighting control — living room, kitchen, hallway from one button panel by the front door.

Araştırma Notları

1. Overview

The Tuya TS0043 is a battery-powered Zigbee 3.0 wireless scene switch with three physical buttons, widely sold under Tuya's own branding and as white-label products (notably LoraTap SS600ZB, plus Moes and others; the Zigbee manufacturer string varies, e.g. _TZ3000_…). It sends button events to a Zigbee coordinator and is most often used to trigger smart-home scenes and automations. It carries no relay/load — it is a controller, not a switch that mains-wires a light.

2. User Sentiment

Very popular in the DIY Zigbee community for its low cost and full local control. Enthusiasts on the Home Assistant forums maintain ready-made blueprints for it, and it has a dedicated Zigbee2MQTT device page. Common praise: cheap, no gateway/cloud lock-in, three buttons each with multiple gestures. Common gripes: the _TZ3000_ variant lottery (some firmware revisions expose actions slightly differently), and pairing quirks between hardware revisions.

3. Real-World Applications

Wall-mounted or handheld scene control: toggling lights/groups, running Home Assistant/Node-RED automations, controlling media or covers. Mounted with adhesive or screws; often placed as a "virtual switch" where no wiring exists.

4. Technical Specifications

  • Type: Zigbee 3.0 wireless scene remote, 3 buttons (battery)
  • Zigbee model: TS0043 (various _TZ3000_… manufacturer IDs)
  • Actions: each button = single / double / long-press (hold ~5 s) → 9 total events (1_single…3_hold)
  • Power: battery, CR2450 coin cell; ~1.5-year life typical
  • Color/Mount: white; adhesive or screw mount
  • No neutral/load — it is a controller only

5. Ordering & Compatibility

  • Integrations (local, no Tuya cloud needed): Zigbee2MQTT (dedicated device page), Home Assistant ZHA, deCONZ; also works via the Tuya/Smart Life gateway + cloud if preferred.
  • Pairing: open the case, hold the PCB button 5–10 s until the indicator flashes (some revisions instead need the left button held ~10 s).
  • White-label equivalents (LoraTap SS600ZB etc.) share the same Z2M handling.

6. Hackability & Known Issues

  • Fully open/local: pairs directly to Zigbee2MQTT/ZHA/deCONZ with no cloud — high hackability; expose actions drive any automation.
  • Known issues: firmware/manufacturer-ID variance can change how actions report (check the exact _TZ3000_ model in Z2M); a few revisions lack a dedicated PCB pairing button.

Kaynak
  1. Tuya TS0043 control via MQTT | Zigbee2MQTT — zigbee2mqtt.io
  2. zigbee2mqtt.io TS0043 device docs — github.com
  3. Blueprint: Zigbee2MQTT Tuya 3-button Scene Switch (TS0043) — community.home-assistant.io
  4. Zigbee2MQTT - Loratap SS600ZB / Tuya TS0043 3-button wireless switch — community.home-assistant.io
  5. Binding Tuya TS0043 switch - zigbee2mqtt discussion — github.com

Açıklık ve Değiştirilebilirlik

Özel Yazılım Yüklenebilir

Özel yazılım: Tasmota, ESPHome (WiFi via tuya-convert), Zigbee2MQTT (Zigbee)

Zigbee models work with Z2M. WiFi models flashable with Tasmota/ESPHome via tuya-convert (no soldering). Most hackable smart ecosystem.

Teknik Özellikler

Battery Life
1.5 years
Battery Type
CR2450
Buttons
3 (each: single / double / hold = 9 actions)
Color
White
Hackability
Fully local via Zigbee2MQTT/ZHA — no Tuya cloud required
Smart Home Integrations
Zigbee2MQTT, ZHA, deCONZ (local, no gateway); Tuya/SmartLife cloud optional
Mounting Type
Adhesive or screw
Power
Battery CR2450, ~1.5yr
Protocol
Zigbee 3.0
White label
LoraTap SS600ZB, Moes, etc.
Zigbee model
TS0043 (various _TZ3000_ IDs)

Hızlı Montaj Kılavuzu

Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.

Battery: Uses CR2450 battery. Expected life: 1.5 years. Low battery notification via the app.

Boyutlar

Sorun Giderme

Not responding to input

Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.

Nereden Satın Alınır

Fiyat aralığı

$82.39 — $101.06

across 2 sellers in US dollars

Kısa Teknik Özellikler

Battery Life
1.5 years
Battery Type
CR2450
Buttons
3 (each: single / double / hold = 9 actions)
Color
White
Hackability
Fully local via Zigbee2MQTT/ZHA — no Tuya cloud required

Kullanıcı Görüşleri

•

“Three buttons, 9 actions. Mid-size between the 2-gang and 4-gang. Popular for 3-zone lighting control — living room, kitchen, hallway from one button panel by the front door.”

Reddit r/homeassistant 27 olumlu oy Konuyu görüntüle →