TS0043
ActiveTuya Zigbee Scene Button 3-Gang
Tuya Zigbee 3-button scene controller.
Common Applications
Three buttons, 9 actions. Mid-size between the 2-gang and 4-gang. Popular for 3-zone lighting control — living room, kitchen, hallway from one button panel by the front door.
Research Notes
1. Overview
The Tuya TS0043 is a battery-powered Zigbee 3.0 wireless scene switch with three physical buttons, widely sold under Tuya's own branding and as white-label products (notably LoraTap SS600ZB, plus Moes and others; the Zigbee manufacturer string varies, e.g. _TZ3000_…). It sends button events to a Zigbee coordinator and is most often used to trigger smart-home scenes and automations. It carries no relay/load — it is a controller, not a switch that mains-wires a light.
2. User Sentiment
Very popular in the DIY Zigbee community for its low cost and full local control. Enthusiasts on the Home Assistant forums maintain ready-made blueprints for it, and it has a dedicated Zigbee2MQTT device page. Common praise: cheap, no gateway/cloud lock-in, three buttons each with multiple gestures. Common gripes: the _TZ3000_ variant lottery (some firmware revisions expose actions slightly differently), and pairing quirks between hardware revisions.
3. Real-World Applications
Wall-mounted or handheld scene control: toggling lights/groups, running Home Assistant/Node-RED automations, controlling media or covers. Mounted with adhesive or screws; often placed as a "virtual switch" where no wiring exists.
4. Technical Specifications
- Type: Zigbee 3.0 wireless scene remote, 3 buttons (battery)
- Zigbee model: TS0043 (various
_TZ3000_…manufacturer IDs) - Actions: each button = single / double / long-press (hold ~5 s) → 9 total events (1_single…3_hold)
- Power: battery, CR2450 coin cell; ~1.5-year life typical
- Color/Mount: white; adhesive or screw mount
- No neutral/load — it is a controller only
5. Ordering & Compatibility
- Integrations (local, no Tuya cloud needed): Zigbee2MQTT (dedicated device page), Home Assistant ZHA, deCONZ; also works via the Tuya/Smart Life gateway + cloud if preferred.
- Pairing: open the case, hold the PCB button 5–10 s until the indicator flashes (some revisions instead need the left button held ~10 s).
- White-label equivalents (LoraTap SS600ZB etc.) share the same Z2M handling.
6. Hackability & Known Issues
- Fully open/local: pairs directly to Zigbee2MQTT/ZHA/deCONZ with no cloud — high hackability; expose actions drive any automation.
- Known issues: firmware/manufacturer-ID variance can change how actions report (check the exact
_TZ3000_model in Z2M); a few revisions lack a dedicated PCB pairing button.
5 sources
- Tuya TS0043 control via MQTT | Zigbee2MQTT — zigbee2mqtt.io
- zigbee2mqtt.io TS0043 device docs — github.com
- Blueprint: Zigbee2MQTT Tuya 3-button Scene Switch (TS0043) — community.home-assistant.io
- Zigbee2MQTT - Loratap SS600ZB / Tuya TS0043 3-button wireless switch — community.home-assistant.io
- Binding Tuya TS0043 switch - zigbee2mqtt discussion — github.com
Openness & Hackability
Custom firmware: Tasmota, ESPHome (WiFi via tuya-convert), Zigbee2MQTT (Zigbee)
Zigbee models work with Z2M. WiFi models flashable with Tasmota/ESPHome via tuya-convert (no soldering). Most hackable smart ecosystem.
Specifications
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
1.5 years
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2450
|
|
Buttons
|
3 (each: single / double / hold = 9 actions)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Hackability
|
Fully local via Zigbee2MQTT/ZHA — no Tuya cloud required
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Zigbee2MQTT, ZHA, deCONZ (local, no gateway); Tuya/SmartLife cloud optional
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Adhesive or screw
|
|
Power
|
Battery CR2450, ~1.5yr
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
|
White label
|
LoraTap SS600ZB, Moes, etc.
|
|
Zigbee model
|
TS0043 (various _TZ3000_ IDs)
|
Installation Quick Reference
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2450 battery. Expected life: 1.5 years. Low battery notification via the app.
Dimensions
Troubleshooting
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Where to Buy
Price range
$82.39 — $101.06
across 2 sellers in US dollars
Quick Specs
- Battery Life
- 1.5 years
- Battery Type
- CR2450
- Buttons
- 3 (each: single / double / hold = 9 actions)
- Color
- White
- Hackability
- Fully local via Zigbee2MQTT/ZHA — no Tuya cloud required
What People Are Saying
“Three buttons, 9 actions. Mid-size between the 2-gang and 4-gang. Popular for 3-zone lighting control — living room, kitchen, hallway from one button panel by the front door.”