PS-14-GN
AktifPS-14-GN Snap-in Arcade Button (30mm, Clear)
30mm snap-in arcade push button from Seimitsu with a clear plunger. Slightly stiffer actuation than the Sanwa OBSF-30, preferred by players who want more tactile feedback and fewer accidental inputs.
Yaygın Uygulamalar
Popular alternative to the Sanwa OBSF-30 for players who prefer a firmer feel. The clear plunger allows art inserts or LED backlighting. Direct drop-in replacement for any 30mm snap-in button position.
Teknik Özellikler
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
85g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Clear (various tints available)
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
NO (normally open)
|
|
Diameter
|
30mm
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
ABS plastic (clear)
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
3,000,000 cycles
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
built-in
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
snap-in
|
|
Panel thickness
|
1-5mm
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2mm
|
Uyumlu Alternatifler
Bu ürünler, diğer üreticilerden işlevsel olarak eşdeğer çapraz referanslardır.
Hızlı Montaj Kılavuzu
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Boyutlar
Bağlantı Şeması
Sorun Giderme
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Nereden Satın Alınır
Kısa Teknik Özellikler
- Actuation Force
- 85g
- Color
- Clear (various tints available)
- Contact Configuration
- NO (normally open)
- Diameter
- 30mm
- Material
- ABS plastic (clear)
Kullanıcı Görüşleri
“Seimitsu PS-14-GN is solid for both casual and competitive play. The feel is consistent across the product line which is what matters for muscle memory.”