XB5AS8442
AktifSchneider Electric XB5AS8442
Emergency Stop Switches / E-Stop Switches E.stop PB plastic red mushr turn 1NC
Araştırma Notları
1. What this is
XB5AS8442 is a Schneider Electric Harmony XB5 complete 22mm pushbutton with PLASTIC bezel (industrial IEC command switch).
2. Part-number decode
- Series: Harmony XB5
- Panel cutout: 22mm
- Bezel material: Plastic
- Type: complete unit
3. Compatibility & ordering
Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. This is a complete, pre-assembled device (operator + contact block). Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.
4. Data-quality note
The Schneider series, bezel material, size, and component type are decoded from the part number (grounded in the se.com Harmony catalog and distributor listings). The exact colour and contact arrangement are encoded in the remaining digits and depend on the sub-family — confirm against the Schneider datasheet for a precise order (not guessed here).
5. Sources
- Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
- Distributor listing (Rexel / Mouser / Newark) — search the exact part number
Kaynak
- Schneider Electric — XB5AS8442 — se.com
Harmony XB5 serisi hakkında
Yalnızca XB5AS8442 değil, tüm ürün yelpazesindeki her bir parça için geçerlidir.
Ürün Yelpazesi Nedir
Harmony XB5, Schneider Electric'in plastik 22 mm butonlar, seçici anahtarlar, anahtar anahtarlar, acil durdurma butonları ve pilot lambaları serisidir. Çift yalıtımlıdır (Sınıf II), koyu gri bezelli veya birçok parça için açık gri bezellidir. Harmony XB4 metal serisinin plastik ikizidir: aynı fonksiyonlar, aynı 22 mm delik ve büyük ölçüde aynı yedek parçalar. 30 mm delik için gömme versiyonlar XB5F / ZB5F olarak satılır.
Parça Numaraları Nasıl Birleştirilir
- Tam ünite = gövde + başlık. XB5AD33, iki NO kontaklı (ZB5AZ103) gövde artı başlıktan (ZB5AD3) oluşur. Ayrıca sabitleme flanşı ZB5AZ009, kontak blokları ve başlığı ayrı ayrı satın alabilirsiniz.
- Gri bezel: C0 ekleyin (XB5AD33 → XB5AD33C0).
- Push-in terminaller: 5 ile biten tam üniteler (XB5AD335).
- Seçici başlıklar XB4'teki gibi çalışır: ZB5AD2 iki pozisyon sabit kalır; ZB5AD4 sağdan sola yaylı dönüş; ZB5AD3 üç pozisyon sabit kalır; ZB5AD5 ortaya yaylı dönüş; ZB5AD7 / ZB5AD8 soldan / sağdan ortaya yaylı dönüş. J uzun kolu (ZB5AJ3), G bir anahtar anahtarıdır.
- Kontaklı gövdeler: ZB5AZ101 (1 NO), ZB5AZ102 (1 NC), ZB5AZ103 (2 NO), ZB5AZ104 (2 NC), ZB5AZ105 (1 NO + 1 NC), ZB5AZ141 (1 NO + 2 NC).
Harmony XB4 ile Paylaşılanlar
Kontak blokları (ZBE101 NO, ZBE102 NC, ZBE203/204/205 çiftler, düşük güç ZBE1016) ve Universal LED ışık blokları (ZBVB1, ZBVG1, ZBVM1) her iki seri için aynı referanslara sahiptir. Aynı şey etiket tutucuları (ZBZ32), basılı etiketler (ör. ZBY2385 "AUTO-O-HAND"), seçici koruyucu ZBZ2102 ve acil durdurma koruyucu ZBZ1605 için de geçerlidir. XB5'e özgü parçalar sabitleme flanşı ZB5AZ009, boşluk tıkacı ZB5SZ3, 30 mm gömme kitleri ZB5AZ021 / ZB5AZ022, yedek sabitleme somunu ZB5AZ901 ve somun aracı ZB5AZ905'dir.
Serinin Derecelendirmeleri (Schneider kataloğu, Ocak 2026)
- IP66, IP67, IP69, IP69K ve UL Tip 4X; −40 ila +70 °C; çift yalıtımlı
- IEC, UL, CSA, CCC, EAC, JIS; denizcilik onayları
- Darbe: katalog bir sayfada "IK06'a kadar" ve başka bir sayfada "IK03'e kadar" derken, kontrol ettiğimiz veri sayfaları (XB5AD33, XB5AD33N) IK04 diyor
- Kimyasal direnç, metal XB4'e karşı serinin satış noktasıdır; darbe, titreşim ve ısı için Schneider XB4'e işaret ediyor (IK06)
Kurulum
XB4'ün aksine, başlık ön tarafta bir plastik somun ile tutulur, Schneider'in aracı ZB5AZ905 ile 2.2 N·m'ye sıkılır. Gövde daha sonra arkadan takılır. Terminaller 0.34–1.5 mm² (AWG 22–16), terminal başına iki tel, 0.8–1.2 N·m kabul eder.
Dikkat: XB5…N farklı, yerel bir seridir
N ile biten kodlar (XB5AD33N, "Harmony XB5N / XB7N") Schneider'in Hindistan için yerel serisidir, küresel XB5 parçası değildir:
| XB5AD33 (küresel XB5) | XB5AD33N (yerel XB5N) | |
|---|---|---|
| Koruma | IP67, IP69, IP69K | IP65 (ürün web sayfası IP54 diyor) |
| Çalışma sıcaklığı | −40 ila +70 °C | −25 ila +70 °C |
| Sertifikalar | UL, CSA, BV | CE |
| Kontaklar, derecelendirmeler, 1 M çevrim, Sınıf II | aynı | aynı |
Her ikisi de orijinal Schneider parçalarıdır. Yıkama, açık hava veya Kuzey Amerika (UL) kullanımı için N olmayan kodu sipariş edin. Schneider Çin aynı bölünmeye dikkat çekiyor: XB5 ithal ve yerel yapım modeller olarak mevcuttur, XB4 ise yalnızca ithal edilir.
Satın Alma Notları
- Benzerler: XB5 aynı zamanda genel bir tip adı olarak kullanılır. Amazon, Schneider ürünü olmayan markasız "XB5" butonlar ve seçiciler satmaktadır.
- Yorumlar: bazı Hint mağaza sayfaları şablonlu yorumlar taşır, farklı ürünlerde aynı beş yorumcu adı ve tarihler bulunur. Bunları göz ardı ettik.
- Kullanımda sorunlar: XB5 için tekrarlayan bir arıza modeli bulamadık (beş dilde çatlamış veya gevşek somunlar ve kırık seçiciler aradık).
Kaynak
- Harmony XB5 plastic Control and signaling units catalog (DIA5ED2121213EN, January 2026) — Schneider Electric
- XB5AD33 product page and datasheet — Schneider Electric India
- XB5AD33N (Harmony XB5N/XB7N, local range) product page and datasheet — Schneider Electric India
- Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
- FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
- Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
- Mounting the Harmony XB5/ZB5 22mm Plastic Push Button & Contacts — Schneider Electric, YouTube
Teknik Özellikler
|
Bezel material
|
plastic
|
|
Component type
|
complete unit
|
|
Enriched by
|
schneider-decoder-2026-08-12
|
|
Lead time
|
23 Days
|
|
Manufacturer series
|
Harmony XB5
|
|
Mouser part number
|
996-XB5AS8442
|
|
Panel cutout
|
22mm
|
|
Pn status
|
decoded
|
|
Wireless Range
Maximum wireless range in open air. Walls and interference reduce this significantly.
|
Harmony / Square D Class 9001
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
Schneider Harmony XB5 complete 22mm pushbutton with PLASTIC bezel (industrial IEC command switch)
|
Hızlı Montaj Kılavuzu
Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
Boyutlar
Sorun Giderme
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
Nereden Satın Alınır
Kısa Teknik Özellikler
- Bezel material
- plastic
- Component type
- complete unit
- Enriched by
- schneider-decoder-2026-08-12
- Lead time
- 23 Days
- Manufacturer series
- Harmony XB5