ZB4-BD3
ใช้งานอยู่22mm 3-Position Selector Maintained
Schneider XB4 3-position selector with spring return to center.
การใช้งานทั่วไป
Jog left/center/jog right selector. Spring returns to center when released. Used for momentary directional control on conveyors and test panels.
ข้อมูลจำเพาะ
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Maintained (stay-put)
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
คู่มือการติดตั้งอย่างรวดเร็ว
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
ขนาด
การแก้ไขปัญหา
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
สถานที่จำหน่าย
ช่วงราคา
$18.02 — $78.95
จาก 3 ผู้จัดจำหน่าย
ข้อมูลจำเพาะอย่างย่อ
- Actuator Function
- Maintained (stay-put)
- Certifications
- UL, CSA, CE
- Cutout Diameter
- 22mm
- IP Rating
- IP66
- Material
- Metal
สิ่งที่ผู้คนพูดถึง
“Jog left/center/jog right selector. Spring returns to center when released. Used for momentary directional control on conveyors and test panels.”
