XB4-BVB4-230
ใช้งานอยู่Schneider XB4BVB4 Red Pilot Light 24V AC/DC (Harmony XB4)
Schneider XB4 red pilot light for 230V AC.
การใช้งานทั่วไป
Red 230V indicator for European direct-mains panels. Fault indication on 230V circuits.
ข้อมูลจำเพาะ
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
Harmony XB4 complete pilot/indicator light (status, NOT a pushbutton)
|
|
IP Rating
IP69K: Dust-tight and withstands high-pressure, high-temperature steam jets. Built for food processing washdown environments.
|
IP66 / IP69K
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V AC/DC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
|
Pn note
|
Corrected: XB4BVB4 = red, 24V AC/DC (se.com). Was mislabeled 230V (bogus -230 suffix). XB4-BV voltage letter B=24V (G=110-120V, M=230-240V). AUDIT other XB4-BV*-230 entries.
|
|
Pn status
|
voltage-corrected
|
คู่มือการติดตั้งอย่างรวดเร็ว
Panel cutout: 22mm. Insert from the front, secure with mounting nut.
LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.
Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.
ขนาด
การแก้ไขปัญหา
Light is dim or flickering
Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).
Light doesn't turn on
Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.
สถานที่จำหน่าย
ช่วงราคา
$11.17 — $147.07
จาก 2 ผู้จัดจำหน่าย
ข้อมูลจำเพาะอย่างย่อ
- Certifications
- UL, CSA, CE
- Color
- Red
- Cutout Diameter
- 22mm
- Device type
- Harmony XB4 complete pilot/indicator light (status, NOT a pushbutton)
- IP Rating
- IP66 / IP69K
สิ่งที่ผู้คนพูดถึง
“Red 230V indicator for European direct-mains panels. Fault indication on 230V circuits.”