XB5AS8444

ใช้งานอยู่

Schneider Electric XB5AS8444

หมายเลขชิ้นส่วน: A - S - 844
Schneider Electric XB5AS8444 — Schneider Electric XB5AS8444

Emergency Stop Switches / E-Stop Switches E-STOP TTR W/ 2NC E-STOP TTR W/ 2NC

บันทึกการวิจัย

1. What this is

XB5AS8444 is a Schneider Electric Harmony XB5 complete 22mm pushbutton with PLASTIC bezel (industrial IEC command switch).

2. Part-number decode

  • Series: Harmony XB5
  • Panel cutout: 22mm
  • Bezel material: Plastic
  • Type: complete unit

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. This is a complete, pre-assembled device (operator + contact block). Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Schneider series, bezel material, size, and component type are decoded from the part number (grounded in the se.com Harmony catalog and distributor listings). The exact colour and contact arrangement are encoded in the remaining digits and depend on the sub-family — confirm against the Schneider datasheet for a precise order (not guessed here).

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

แหล่งที่มา
  1. Schneider Electric — XB5AS8444 — se.com
เกี่ยวกับกลุ่มผลิตภัณฑ์ Harmony XB5

ใช้ได้กับทุกส่วนของผลิตภัณฑ์ ไม่เพียงแต่ XB5AS8444 เท่านั้น

ช่วงผลิตภัณฑ์คืออะไร

Harmony XB5 คือช่วงผลิตภัณฑ์ของ Schneider Electric สำหรับ ปุ่มกดพลาสติกขนาด 22 มม. สวิตช์เลือก, สวิตช์กุญแจ, ปุ่มหยุดฉุกเฉิน และไฟสัญญาณ ผลิตภัณฑ์นี้เป็นฉนวนสองชั้น (Class II) มีเบเซลสีเทาเข้ม หรือสำหรับหลายรุ่นมีสีเทาอ่อน เป็นผลิตภัณฑ์พลาสติกคู่กับ Harmony XB4 ที่เป็นโลหะ: มีฟังก์ชันเดียวกัน รูขนาด 22 มม. เหมือนกัน และส่วนใหญ่ใช้ชิ้นส่วนอะไหล่ร่วมกัน รุ่นแบบฝังสำหรับรูขนาด 30 มม. จะขายในชื่อ XB5F / ZB5F

การจัดเรียงหมายเลขชิ้นส่วน

  • ชุดครบ = ตัวถัง + หัวสวิตช์ XB5AD33 คือตัวถังที่มีหน้าสัมผัส NO 2 ตัว (ZB5AZ103) พร้อมหัวสวิตช์ (ZB5AD3) คุณยังสามารถซื้อแหวนยึด ZB5AZ009, บล็อกหน้าสัมผัส และหัวสวิตช์แยกต่างหากได้
  • เบเซลสีเทา: เพิ่ม C0 (XB5AD33 → XB5AD33C0)
  • เทอร์มินัลแบบเสียบ: ชุดครบที่ลงท้ายด้วย 5 (XB5AD335)
  • หัวสวิตช์เลือก ทำงานเหมือนกับ XB4: ZB5AD2 ตำแหน่งคงที่ 2 ตำแหน่ง; ZB5AD4 สปริงกลับจากขวาไปซ้าย; ZB5AD3 ตำแหน่งคงที่ 3 ตำแหน่ง; ZB5AD5 สปริงกลับสู่กลาง; ZB5AD7 / ZB5AD8 สปริงกลับจากซ้าย / ขวาสู่กลาง J คือก้านยาว (ZB5AJ3), G คือสวิตช์กุญแจ
  • ตัวถังพร้อมหน้าสัมผัส: ZB5AZ101 (1 NO), ZB5AZ102 (1 NC), ZB5AZ103 (2 NO), ZB5AZ104 (2 NC), ZB5AZ105 (1 NO + 1 NC), ZB5AZ141 (1 NO + 2 NC)

ส่วนที่ใช้ร่วมกับ Harmony XB4

บล็อกหน้าสัมผัส (ZBE101 NO, ZBE102 NC, ZBE203/204/205 คู่, กำลังต่ำ ZBE1016) และบล็อกไฟ LED Universal (ZBVB1, ZBVG1, ZBVM1) มีหมายเลขอ้างอิงเดียวกันทั้งสองช่วงผลิตภัณฑ์ เช่นเดียวกับตัวยึดป้าย (ZBZ32), ป้ายพิมพ์ (เช่น ZBY2385 "AUTO-O-HAND"), เกราะป้องกันสวิตช์เลือก ZBZ2102 และเกราะป้องกันปุ่มหยุดฉุกเฉิน ZBZ1605 ส่วนที่เฉพาะสำหรับ XB5 คือแหวนยึด ZB5AZ009, ปลั๊กอุด ZB5SZ3, ชุดฝังขนาด 30 มม. ZB5AZ021 / ZB5AZ022, น็อตยึดอะไหล่ ZB5AZ901 และเครื่องมือขันน็อต ZB5AZ905

ระดับมาตรฐานสำหรับช่วงผลิตภัณฑ์ (แคตตาล็อก Schneider, มกราคม 2026)

  • IP66, IP67, IP69, IP69K และ UL Type 4X; −40 ถึง +70 °C; ฉนวนสองชั้น
  • IEC, UL, CSA, CCC, EAC, JIS; มาตรฐานทางทะเล
  • การกระแทก: แคตตาล็อกระบุ "สูงสุด IK06" ในหนึ่งหน้า และ "สูงสุด IK03" ในอีกหน้า ในขณะที่เอกสารข้อมูลที่เราตรวจสอบ (XB5AD33, XB5AD33N) ระบุ IK04
  • ความทนทานต่อสารเคมีเป็นจุดขายของช่วงผลิตภัณฑ์นี้เมื่อเทียบกับ XB4 ที่เป็นโลหะ; สำหรับการกระแทก การสั่นสะเทือน และความร้อน Schneider ชี้ให้ใช้ XB4 (IK06)

การติดตั้ง

ต่างจาก XB4 หัวสวิตช์จะถูกยึดด้วย น็อตพลาสติก ที่ด้านหน้า ขันด้วยเครื่องมือของ Schneider ZB5AZ905 ที่แรงบิด 2.2 N·m จากนั้นตัวถังจะถูกติดตั้งจากด้านหลัง เทอร์มินัลรองรับสาย 0.34–1.5 mm² (AWG 22–16), สายสองเส้นต่อเทอร์มินัล ที่แรงบิด 0.8–1.2 N·m

ระวัง: XB5…N เป็นช่วงผลิตภัณฑ์ท้องถิ่นที่ต่างออกไป

รหัสที่ลงท้ายด้วย N (XB5AD33N, "Harmony XB5N / XB7N") เป็น ช่วงผลิตภัณฑ์ท้องถิ่นสำหรับอินเดีย ของ Schneider ไม่ใช่ XB5 ส่วนกลาง:

XB5AD33 (XB5 ส่วนกลาง)XB5AD33N (XB5N ท้องถิ่น)
การป้องกันIP67, IP69, IP69KIP65 (หน้าเว็บผลิตภัณฑ์ระบุ IP54)
อุณหภูมิการทำงาน−40 ถึง +70 °C−25 ถึง +70 °C
การรับรองUL, CSA, BVCE
หน้าสัมผัส, ระดับมาตรฐาน, 1 ล้านรอบ, Class IIเหมือนกันเหมือนกัน

ทั้งสองเป็นชิ้นส่วนแท้ของ Schneider สำหรับการล้างด้วยน้ำ กลางแจ้ง หรือใช้งานในอเมริกาเหนือ (UL) ให้สั่งซื้อรหัสที่ไม่มี N Schneider China ระบุความแตกต่างเดียวกัน: XB5 มีทั้งรุ่นนำเข้าและผลิตในท้องถิ่น ในขณะที่ XB4 เป็นรุ่นนำเข้าเท่านั้น

ข้อสังเกตในการซื้อ

  • ของเลียนแบบ: XB5 ยังถูกใช้เป็นชื่อประเภททั่วไป Amazon ขายปุ่มกดและสวิตช์เลือก "XB5" ที่ไม่มีแบรนด์ซึ่งไม่ใช่ผลิตภัณฑ์ของ Schneider
  • รีวิว: บางหน้าสินค้าในอินเดียมีรีวิวแบบสำเร็จรูป โดยมีชื่อผู้รีวิวและวันที่เดียวกันห้าชื่อในผลิตภัณฑ์ต่างกัน เราไม่สนใจรีวิวเหล่านั้น
  • ปัญหาในการใช้งาน: เราไม่พบรูปแบบความเสียหายที่เกิดขึ้นซ้ำๆ สำหรับ XB5 (เราค้นหาการแตกหรือน็อตหลวมและสวิตช์เลือกเสียหายในห้าภาษา)
แหล่งที่มา
  1. Harmony XB5 plastic Control and signaling units catalog (DIA5ED2121213EN, January 2026) — Schneider Electric
  2. XB5AD33 product page and datasheet — Schneider Electric India
  3. XB5AD33N (Harmony XB5N/XB7N, local range) product page and datasheet — Schneider Electric India
  4. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  5. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  6. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  7. Mounting the Harmony XB5/ZB5 22mm Plastic Push Button & Contacts — Schneider Electric, YouTube

ข้อมูลจำเพาะ

Bezel material
plastic
Component type
complete unit
Enriched by
schneider-decoder-2026-08-12
Lead time
25 Days
Manufacturer series
Harmony XB5
Mouser part number
996-XB5AS8444
Panel cutout
22mm
Pn status
decoded
Wireless Range
Harmony / Square D Class 9001
Rohs status
RoHS Compliant
Series description
Schneider Harmony XB5 complete 22mm pushbutton with PLASTIC bezel (industrial IEC command switch)

คู่มือการติดตั้งอย่างรวดเร็ว

Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

ขนาด

การแก้ไขปัญหา

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

รูปภาพและแบบแปลน

รูปภาพ: mouser.com

สถานที่จำหน่าย

ข้อมูลจำเพาะอย่างย่อ

Bezel material
plastic
Component type
complete unit
Enriched by
schneider-decoder-2026-08-12
Lead time
25 Days
Manufacturer series
Harmony XB5