Sanwa Denshi · OBSF ซีรีส์

OBSF-30-R

ใช้งานอยู่

OBSF-30 Red 30mm Snap-in

Sanwa Denshi OBSF ซีรีส์ Introduced circa 2003

Sanwa OBSF-30 red arcade button.

การใช้งานทั่วไป

Red Sanwa for action buttons — commonly mapped to heavy punch/kick. Same 65g actuation and 0.85mm travel.

ข้อมูลจำเพาะ

Actuation Force
65g
Color
Red
Diameter
30mm
Mechanical Life
5,000,000 cycles
Microswitch Type
Built-in
Mounting Type
Snap-in
Travel Distance
0.85mm

คู่มือการติดตั้งอย่างรวดเร็ว

Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.

Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.

ขนาด

การแก้ไขปัญหา

Not responding to input

Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.

สถานที่จำหน่าย

ช่วงราคา

$9.03 — $45.27

จาก 2 ผู้จัดจำหน่าย

ข้อมูลจำเพาะอย่างย่อ

Actuation Force
65g
Color
Red
Diameter
30mm
Mechanical Life
5,000,000 cycles
Microswitch Type
Built-in

สิ่งที่ผู้คนพูดถึง

+

“OBSF-30-R red is the classic choice for heavy punch/kick position. Same internals as every other OBSF-30, just the shell color is different. Mix colors for easy button identification during play.”

Reddit r/fightsticks by tournament_player 15 โหวตขึ้น ดูเกลียว →