ZB4-BJ2
В производстве22mm 2-Position Selector Spring Return
Schneider Harmony XB4 2-position selector with spring return to right.
Типичные применения
Spring-return selector for momentary functions. Turn left and release — springs back to right. Used for momentary jog, test pulse, or single-cycle activation. The spring return prevents leaving the machine in an unintended mode.
Характеристики
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Spring return
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
Краткое руководство по монтажу
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Габаритные размеры
Устранение неисправностей
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Где купить
Диапазон цен
$19.81 — $76.87
у 3 дистрибьюторов
Краткие характеристики
- Actuator Function
- Spring return
- Certifications
- UL, CSA, CE
- Cutout Diameter
- 22mm
- IP Rating
- IP66
- Material
- Metal
Что говорят пользователи
“Spring-return selector for momentary functions. Turn left and release — springs back to right. Used for momentary jog, test pulse, or single-cycle activation. The spring return prevents leaving the ma”