OBSF-30-O
В производствеOBSF-30 Orange 30mm Snap-in
Sanwa OBSF-30 orange arcade button.
Типичные применения
Orange Sanwa for distinctive fight stick builds. Less common than primary colors. Same 65g actuation internals.
Характеристики
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
65g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Orange
|
|
Diameter
|
30mm
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Built-in
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snap-in
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
0.85mm
|
Краткое руководство по монтажу
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Габаритные размеры
Устранение неисправностей
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Где купить
Диапазон цен
$7.06 — $64.82
у 2 дистрибьюторов
Краткие характеристики
- Actuation Force
- 65g
- Color
- Orange
- Diameter
- 30mm
- Microswitch Type
- Built-in
- Mounting Type
- Snap-in
Что говорят пользователи
“Orange Sanwa for distinctive fight stick builds. Less common than primary colors. Same 65g actuation internals.”
