QanBa 24mm Snap In Illuminated Arcade Button 5V LED. This button is very similar to the Sanwa OBSF-24 and are the ones used in Qanba Arcade Sticks.
Specificații
|
Arcade express id
|
780
|
|
Weight kg
|
0.080000
|
Referință rapidă de instalare
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensiuni
Depanare
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
De unde cumpărați
Interval de preț
$2.38 — $2.38
la 1 distribuitori
Specificații rapide
- Arcade express id
- 780
- Weight kg
- 0.080000
