QanBa 24mm Snap In Illuminated Arcade Button 5V LED. This button is very similar to the Sanwa OBSF-24 and are the ones used in Qanba Arcade Sticks.
Research Notes
1. Overview
A Qanba 24 mm snap-in LED-illuminated arcade pushbutton — the 24 mm size of Qanba's LED-lit snap-in line, translucent plunger with a built-in LED. For lit Start/aux positions; fits standard 24 mm cutouts.
2. Technical Specifications & Compatibility
See the structured specs on this page (diameter, mounting, plunger/finish, microswitch). These are standard arcade-button form factors — confirm the panel cutout (30 mm / 24 mm / 18 mm as applicable) and the snap-in vs screw-in mount for your panel thickness before ordering.
3. Sources
2 sources
- Qanba 24 mm Snap-In Illuminated (LED) Arcade Pushbutton — qanba.com
- Qanba 24 mm Snap-In Illuminated (LED) Arcade Pushbutton — www.slagcoin.com
Specifications
|
Arcade express id
|
780
|
|
Device type
|
Qanba 24mm snap-in LED-illuminated arcade pushbutton
|
|
Diameter
|
24mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
LED (built-in)
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snap-in
|
|
Reference pn
|
Qanba 24mm snap-in illuminated (AX-780 is an Arcade Express catalog ID)
|
|
Weight kg
|
0.080000
|
Installation Quick Reference
Mounting: Snap-in buttons push into a 24mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensions
Troubleshooting
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Quick Specs
- Arcade express id
- 780
- Device type
- Qanba 24mm snap-in LED-illuminated arcade pushbutton
- Diameter
- 24mm
- Illumination
- LED (built-in)
- Mounting Type
- Snap-in
