Tecsee Ruby V2's feature the same one-of-a-kind sparkling housing, smooth travel, and long pole stem as the V1's, but with an updated UHMWPE stem. They offer the same snappy response as their ancestors but this time with a softened bottom, and top out sound. Switches are sold in packs of 10. Quantity 1 = 10 switches. Specifications: Linear Top Housing: Polycarbonate mix Bottom Housing: Polycarbonate mix Stem: UHMWPE 63.5g (Bottom out) Gold plated progressive spring 5 pin (PCB Mount) Lightly pre-lubed Sound Test:
Notas de Pesquisa
1. What this is
RUBY V2 ("Tecsee Ruby V2") is catalogued as a push-button / switch device from Tecsee.
2. What we know
- Manufacturer: Tecsee
- Category: push-button / switch device
- Part number / name: RUBY V2 — Tecsee Ruby V2
- Tecsee — see the manufacturer's catalog for this part.
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Tecsee catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.
5. Sources
- Tecsee product catalog — search "RUBY V2" / "Tecsee Ruby V2"
Fonte
- Tecsee RUBY V2 — distributor/catalog
Especificações
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
switches
|
|
Shopify id
|
6895088107692
|
|
Vendor
|
dangkeebs
|
Referência rápida de instalação
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensões
Solução de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Especificações rápidas
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Pn status
- decoded-partial
- Product type
- switches
- Shopify id
- 6895088107692
Saiba mais
Graus de proteção IP explicados
O que IP65, IP66, IP67, IP69K significam para sua aplicação
Guia 22mm vs. 30mm
Qual tamanho de recorte de painel você precisa?
Blocos de contato: NO vs. NC
Como escolher e conectar blocos de contato
Ferramenta localizador de botões
Encontre o botão certo por tipo, tamanho e cor