Tecsee Ruby V2's feature the same one-of-a-kind sparkling housing, smooth travel, and long pole stem as the V1's, but with an updated UHMWPE stem. They offer the same snappy response as their ancestors but this time with a softened bottom, and top out sound. Switches are sold in packs of 10. Quantity 1 = 10 switches. Specifications: Linear Top Housing: Polycarbonate mix Bottom Housing: Polycarbonate mix Stem: UHMWPE 63.5g (Bottom out) Gold plated progressive spring 5 pin (PCB Mount) Lightly pre-lubed Sound Test:
研究ノート
1. What this is
RUBY V2 ("Tecsee Ruby V2") is catalogued as a push-button / switch device from Tecsee.
2. What we know
- Manufacturer: Tecsee
- Category: push-button / switch device
- Part number / name: RUBY V2 — Tecsee Ruby V2
- Tecsee — see the manufacturer's catalog for this part.
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Tecsee catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.
5. Sources
- Tecsee product catalog — search "RUBY V2" / "Tecsee Ruby V2"
出典
- Tecsee RUBY V2 — distributor/catalog
仕様一覧
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
switches
|
|
Shopify id
|
6895088107692
|
|
Vendor
|
dangkeebs
|
取付クイックリファレンス
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
外形寸法
トラブルシューティング
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
主要仕様
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Pn status
- decoded-partial
- Product type
- switches
- Shopify id
- 6895088107692