3SU1130-2CF60-1BA0
AtivoSIRIUS ACT 3-Position Selector Spring Return
Siemens SIRIUS ACT 3-position selector with spring return to center.
Aplicações comuns
Hand/Off/Auto with spring return to Off center position. Metal front ring. The spring return means releasing the selector always returns to the safe Off position.
Especificações
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Spring return to center
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
2x 1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal front ring
|
Referência rápida de instalação
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Dimensões
Diagrama de fiação
Solução de problemas
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Onde comprar
Faixa de preço
$29.52 — $101.44
em 2 distribuidores
Especificações rápidas
- Actuator Function
- Spring return to center
- Certifications
- UL, CSA, CE
- Contact Configuration
- 2x 1NO
- Cutout Diameter
- 22mm
- IP Rating
- IP67
O que os usuários dizem
“Hand/Off/Auto with spring return to Off center position. Metal front ring. The spring return means releasing the selector always returns to the safe Off position.”