3SU1130-2CF60-1BA0
ActiveSIRIUS ACT 3-Position Selector Spring Return
Siemens SIRIUS ACT 3-position selector with spring return to center.
Common Applications
Hand/Off/Auto with spring return to Off center position. Metal front ring. The spring return means releasing the selector always returns to the safe Off position.
Research Notes
1. What this is
Siemens SIRIUS ACT 3SU1130-2CF60-1BA0 is a 22mm 3-position selector switch, spring-return to the centre (momentary I–O–II) — a complete plastic-bezel unit in the modular 3SU1 range. Use for hold-to-run / jog selection where the actuator must return to centre when released. Contact/LED modules mount behind the actuator; confirm the exact contact set on the Siemens datasheet.
2. Data-quality note
This row was catalogued in the curated range and left un-enriched by the original research loop; under the keep-and-document policy it now has an honest page. Flagged decoded-partial.
3. Sources
- Manufacturer catalog / distributor listing — search the exact part number
Specifications
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Spring return to center
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
2x 1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Enriched by
|
curated-closeout-2026-08-12
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal front ring
|
|
Pn status
|
decoded-partial
|
Installation Quick Reference
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Dimensions
Wiring Diagram
Troubleshooting
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Where to Buy
Price range
$29.52 — $101.44
across 2 distributors
Quick Specs
- Actuator Function
- Spring return to center
- Certifications
- UL, CSA, CE
- Contact Configuration
- 2x 1NO
- Cutout Diameter
- 22mm
- Enriched by
- curated-closeout-2026-08-12
What People Are Saying
“Hand/Off/Auto with spring return to Off center position. Metal front ring. The spring return means releasing the selector always returns to the safe Off position.”