929003128801
AtivoHue Outdoor Sensor with Button
Philips Hue outdoor sensor with integrated button for manual override.
Aplicações comuns
Outdoor motion sensor with built-in push button for manual light control. The button overrides the motion sensor for fixed-on or fixed-off. IP54 rated for outdoor mounting. Used at front doors, garages, and garden paths.
Abertura e modificabilidade
Standard Zigbee 3.0 — pairs directly with Z2M/ZHA without Hue Bridge. All events fully exposed. Bridge optional.
Especificações
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
2 years
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
2x AAA
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Black
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Philips Hue Bridge, Home Assistant
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
IP54
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
Referência rápida de instalação
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses 2x AAA battery. Expected life: 2 years. Low battery notification via the app.
Dimensões
Solução de problemas
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Onde comprar
Faixa de preço
$19.66 — $30.41
em 2 distribuidores
Especificações rápidas
- Battery Life
- 2 years
- Battery Type
- 2x AAA
- Color
- Black
- Smart Home Integrations
- Philips Hue Bridge, Home Assistant
- IP Rating
- IP54
O que os usuários dizem
“Outdoor motion sensor with built-in push button for manual light control. The button overrides the motion sensor for fixed-on or fixed-off. IP54 rated for outdoor mounting. Used at front doors, garage”