M22-XDL-R-X0
AtivoEaton M22-XDL-R Illuminated Button Lens, Red
Eaton M22 buzzer with red indicator.
Aplicações comuns
Combined visual (red LED) and audible (buzzer) alarm in one 22mm unit. Red + buzzing = fault requiring immediate attention. Saves panel space vs separate indicator and buzzer.
Research Notes
1. Overview
The Eaton M22-XDL-R-X0 (catalog 218159) is a passive button lens for Eaton's M22 / RMQ-Titan 22.5 mm modular control system — the translucent red flush cap that snaps onto an illuminated pushbutton actuator so the internal LED shines through. The -X0 suffix means it is printed with "0" (the zero/"O" = OFF marking). It is not a switch, not an actuator, and not a buzzer — it's the lens/cap component only. (This entry was previously mislabeled in a "buzzer module" cluster; it is a lens accessory.)
2. User Sentiment
The M22/RMQ-Titan modular system is a professional favorite for its clean snap-together design — actuator, lens, contact/LED blocks, and fixing adapter are ordered separately, and lenses like this let panel builders add legends/colors without changing the switch. As a passive lens there are no reliability complaints; the only "gotcha" is understanding the modular ordering (this lens needs the matching illuminated actuator, LED element, and contact block to form a working button).
3. Real-World Applications
The red, "0"-marked lit cap for an illuminated M22 pushbutton — typically an OFF/stop indication on machine and control panels where the button lights up. Pairs with an M22 illuminated actuator + LED + contact blocks.
4. Technical Specifications
- Type: Button lens / cap for M22 illuminated pushbutton (passive accessory)
- Color: red (translucent)
- Inscription: "0" (zero / OFF marking) — the -X0 suffix
- System: Eaton M22 / RMQ-Titan, 22.5 mm
- Mounting: flush; snaps onto illuminated actuator
- Sealing: IP67 / IP69K, NEMA 4X (assembled)
- Approvals: UL, CSA, CE
5. Ordering & Compatibility
Fits Eaton M22 illuminated pushbutton actuators (RMQ-Titan). This is a component, not a complete button: to build a working illuminated button you also need the actuator, an LED element, contact block(s), and the fixing adapter. Widely stocked (Mouser, Newark, etc.) as Eaton 218159. Other colors/inscriptions exist in the M22-XDL family (e.g. -ETCH for blank/etchable).
6. Known Issues
None as a passive lens. The practical care point is modular selection — order the compatible actuator, LED, and contacts to match, and confirm color/inscription (red, "0"). It is not a standalone illuminated device and not a signaling/buzzer part.
2 sources
- Eaton M22-XDL-R-X0 button lens red (218159) — eaton.com
- Eaton 218159 M22-XDL-R-X0 button lens — mouser.com
Especificações
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red (translucent)
|
|
Component type
|
Button lens/cap for M22 illuminated pushbutton (passive)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
Eaton catalog
|
218159
|
|
Inscription
|
0 (OFF marking; -X0 suffix)
|
|
IP Rating
IP69K: Dust-tight and withstands high-pressure, high-temperature steam jets. Built for food processing washdown environments.
|
IP67 / IP69K, NEMA 4X (assembled)
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
M22
|
Referência rápida de instalação
Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensões
Solução de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Onde comprar
Faixa de preço
$5.09 — $118.46
em 3 distribuidores
Especificações rápidas
- Certifications
- UL, CSA, CE
- Color
- Red (translucent)
- Component type
- Button lens/cap for M22 illuminated pushbutton (passive)
- Cutout Diameter
- 22.5mm
- Eaton catalog
- 218159
O que os usuários dizem
“Combined visual (red LED) and audible (buzzer) alarm in one 22mm unit. Red + buzzing = fault requiring immediate attention. Saves panel space vs separate indicator and buzzer.”
Saiba mais
Graus de proteção IP explicados
O que IP65, IP66, IP67, IP69K significam para sua aplicação
Guia 22mm vs. 30mm
Qual tamanho de recorte de painel você precisa?
Blocos de contato: NO vs. NC
Como escolher e conectar blocos de contato
Ferramenta localizador de botões
Encontre o botão certo por tipo, tamanho e cor