M22-XDL-R-X0
AktivEaton M22-XDL-R Illuminated Button Lens, Red
Eaton M22 buzzer with red indicator.
Typische Anwendungen
Combined visual (red LED) and audible (buzzer) alarm in one 22mm unit. Red + buzzing = fault requiring immediate attention. Saves panel space vs separate indicator and buzzer.
Spezifikationen
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red (translucent)
|
|
Component type
|
Button lens/cap for M22 illuminated pushbutton (passive)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
Eaton catalog
|
218159
|
|
Inscription
|
0 (OFF marking; -X0 suffix)
|
|
IP Rating
IP69K: Dust-tight and withstands high-pressure, high-temperature steam jets. Built for food processing washdown environments.
|
IP67 / IP69K, NEMA 4X (assembled)
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
M22
|
Installationskurzanleitung
Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Abmessungen
Fehlerbehebung
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Bezugsquellen
Preisbereich
$5.09 — $118.46
bei 3 Händlern
Kurzspezifikationen
- Certifications
- UL, CSA, CE
- Color
- Red (translucent)
- Component type
- Button lens/cap for M22 illuminated pushbutton (passive)
- Cutout Diameter
- 22.5mm
- Eaton catalog
- 218159
Das sagen Anwender
“Combined visual (red LED) and audible (buzzer) alarm in one 22mm unit. Red + buzzing = fault requiring immediate attention. Saves panel space vs separate indicator and buzzer.”