Eaton · M22 Série

M22-DRP-G

Ativo
UL CSA CE

22mm Green Guarded Push Button M22

Número de peça: M22 - G
Eaton M22 Série Introduced circa 2000

Eaton M22 green guarded push button.

Aplicações comuns

Guarded green for Eaton panels. Same protective ring concept.

Especificações

Actuator Type
Guarded/Shrouded
Certifications
UL, CSA, CE
Color
Green
Cutout Diameter
22.5mm
IP Rating
IP67 (front)
Series
M22

Referência rápida de instalação

Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensões

Front 22.5mm cutout panel hole diameter Side panel contact ~45mm depth

Solução de problemas

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Onde comprar

Faixa de preço

$106.4 — $170.37

em 2 distribuidores

Especificações rápidas

Actuator Type
Guarded/Shrouded
Certifications
UL, CSA, CE
Color
Green
Cutout Diameter
22.5mm
IP Rating
IP67 (front)

O que os usuários dizem

+

“Guarded green for Eaton panels. Same protective ring concept.”

Reddit r/PLC 33 votos positivos Ver tópico →