2711R-T7T
AtivoPanelView 800 7-inch HMI Touch Panel
Allen-Bradley PanelView 800 — Rockwells entry-level touchscreen HMI.
Aplicações comuns
The standard HMI for Allen-Bradley/Rockwell panels. Replaces physical buttons with virtual controls on a 7-inch touch display. Connected View Designer software. Native integration with Micro800 and CompactLogix PLCs. Physical e-stop still required — the touchscreen cannot replace safety-rated buttons.
Especificações
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65 (front)
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel mount
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
EtherNet/IP, Modbus TCP
|
Referência rápida de instalação
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensões
Solução de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Onde comprar
Faixa de preço
$105.57 — $183.1
em 2 distribuidores
Especificações rápidas
- Certifications
- UL, CSA, CE
- IP Rating
- IP65 (front)
- Mounting Type
- Panel mount
- Protocol
- EtherNet/IP, Modbus TCP
O que os usuários dizem
“The standard HMI for Allen-Bradley/Rockwell panels. Replaces physical buttons with virtual controls on a 7-inch touch display. Connected View Designer software. Native integration with Micro800 and Co”
Saiba mais
Graus de proteção IP explicados
O que IP65, IP66, IP67, IP69K significam para sua aplicação
Guia 22mm vs. 30mm
Qual tamanho de recorte de painel você precisa?
Blocos de contato: NO vs. NC
Como escolher e conectar blocos de contato
Ferramenta localizador de botões
Encontre o botão certo por tipo, tamanho e cor