CK X HAIMU CLIPPER SWORDFISH TACTILE

Name: Stocked CK X HAIMU CLIPPER SWORDFISH TACTILE
Brand: Stocked
SKU: CK X HAIMU CLIPPER SWORDFISH TACTILE
Price: 13.95 USD
Availability: InStock

Aktywny

CK x Haimu Clipper Swordfish Tactile Switch

CannonKeys is proud to offer Haimu Clipper Swordfish Tactile Switch! The Haimu Clipper Swordfish Switch is a new tactile addition from Haimu lineup! These switches feature a new durable clip-in mechanism. Switch Type Tactile Manufacturer Haimu Top Housing Material Nylon Bottom Housing Material Nylon Stem Material Nylon Spring Weight 63.5g single stage, 4mm travel Mounting Pins Clip-in 5-pin Factory Lube Yes

Notatki Badawcze

1. What this is

CK X HAIMU CLIPPER SWORDFISH TACTILE ("CK x Haimu Clipper Swordfish Tactile Switch") is catalogued as a push-button / switch device.

2. What we know

Manufacturer: not recorded (placeholder: "Stocked")
Category: push-button / switch device
Part number / name: CK X HAIMU CLIPPER SWORDFISH TACTILE — CK x Haimu Clipper Swordfish Tactile Switch
(no real manufacturer recorded — 'Stocked' is a source-catalog placeholder; identify the part from its name/number)

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the part number/name on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.

5. Sources

Distributor / marketplace listing — search "CK X HAIMU CLIPPER SWORDFISH TACTILE" / "CK x Haimu Clipper Swordfish Tactile Switch"

Źródło

Stocked CK X HAIMU CLIPPER SWORDFISH TACTILE — distributor/catalog

Specyfikacje

Device class	push-button
Enriched by	generic-fallback-2026-08-12
Pn status	decoded-partial
Product type	Accessories
Shopify id	7192635605103
Vendor	Stocked

Skrócona Instrukcja Montażu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wymiary

Rozwiązywanie Problemów

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.