WNAL33WH
AktywnyNetatmo Smart Switch with Zigbee
Legrand Netatmo smart wall switch — Zigbee with Apple HomeKit.
Typowe Zastosowania
European smart wall switch from Legrand (via Netatmo acquisition). Zigbee 3.0 with HomeKit native support. The European equivalent of Leviton Decora Smart. Fits standard European wall plates. No hub needed for HomeKit (uses Thread on newer models).
Otwartość i Modyfikowalność
Zigbee 3.0 — works with Zigbee2MQTT and Home Assistant ZHA. HomeKit works natively via Thread border router. Netatmo cloud optional.
Specyfikacje
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Apple HomeKit, Netatmo App, Home Assistant
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
European wall box
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0 / Thread
|
Skrócona Instrukcja Montażu
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Wymiary
Rozwiązywanie Problemów
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Gdzie Kupić
Przedział cenowy
$146.28 — $188.75
u 2 dystrybutorów
Skrócone Specyfikacje
- Certifications
- CE
- Smart Home Integrations
- Apple HomeKit, Netatmo App, Home Assistant
- Mounting Type
- European wall box
- Protocol
- Zigbee 3.0 / Thread
Co Mówią Użytkownicy
“Zigbee 3.0 — works with Zigbee2MQTT and Home Assistant ZHA. HomeKit works natively via Thread border router. Netatmo cloud optional.”
Dowiedz się Więcej
Objaśnienie Klasyfikacji IP
Co oznaczają IP65, IP66, IP67, IP69K dla Państwa zastosowania
Przewodnik 22mm vs 30mm
Jakiego rozmiaru otworu montażowego potrzebujesz?
Bloki Styków: NO vs NC
Jak wybrać i podłączyć bloki styków
Narzędzie Wyszukiwania Przycisków
Znajdź właściwy przycisk wg typu, rozmiaru i koloru