WNAL33WH
현행 제품Legrand adorne Home/Away Wireless Smart Switch w/ Netatmo (WNAL33WH)
Legrand Netatmo smart wall switch — Zigbee with Apple HomeKit.
일반적인 용도
European smart wall switch from Legrand (via Netatmo acquisition). Zigbee 3.0 with HomeKit native support. The European equivalent of Leviton Decora Smart. Fits standard European wall plates. No hub needed for HomeKit (uses Thread on newer models).
개방성 및 커스터마이징
Zigbee 3.0 — works with Zigbee2MQTT and Home Assistant ZHA. HomeKit works natively via Thread border router. Netatmo cloud optional.
사양 목록
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE
|
|
Device type
|
adorne Home/Away Wireless Smart Switch with Netatmo (whole-home scene control)
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Apple HomeKit, Netatmo/Legrand Home+Control app
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
US wall box (adorne collection)
|
|
Pn note
|
US adorne collection (WNAL=Legrand US), Home/Away scene switch — NOT European wall box. Zigbee/Thread protocol unconfirmed for this US adorne/Netatmo product; verify radio.
|
|
Pn status
|
market-corrected + protocol-to-verify
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
adorne-with-Netatmo wireless system (exact radio unverified; stored Zigbee/Thread not confirmed for this US product)
|
설치 빠른 참조
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
외형 치수
문제 해결
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
주요 사양
- Certifications
- CE
- Device type
- adorne Home/Away Wireless Smart Switch with Netatmo (whole-home scene control)
- Smart Home Integrations
- Apple HomeKit, Netatmo/Legrand Home+Control app
- Mounting Type
- US wall box (adorne collection)
- Pn note
- US adorne collection (WNAL=Legrand US), Home/Away scene switch — NOT European wall box. Zigbee/Thread protocol unconfirmed for this US adorne/Netatmo product; verify radio.
사용자 후기
“Zigbee 3.0 — works with Zigbee2MQTT and Home Assistant ZHA. HomeKit works natively via Thread border router. Netatmo cloud optional.”