E30KB155

Aktywny

Eaton Electrical E30KB155

Eaton Electrical E30KB155 — Eaton Electrical E30KB155

Zdjęcie serii: sprzedawca używa go również dla 28 innych części, więc może nie pokazywać dokładnie tej wersji.

Emergency Stop Switches / E-Stop Switches TYPE B BTN EXTD RED EMERG STOP

Notatki Badawcze

1. What this is

E30KB155 is an Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control).

2. Part-number decode

  • Series: E30
  • Panel cutout: 30.5mm
  • Type: operator/collar/block
  • Construction: modular (operator, contact block(s), and mounting are separate parts)

3. Compatibility & ordering

Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. As an M22/E30 modular device, the operator/actuator, the contact or LED block(s), and the mounting adapter are ordered separately — a common ordering error is assuming a stored contact is included. Confirm you have all the pieces for a complete device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.

4. Data-quality note

The Eaton series, size, and component type are decoded from the part number (grounded in Eaton's Vol.7 catalog and distributor listings). The exact color and contact arrangement depend on the remaining digits and the sub-family — confirm against the Eaton datasheet for a precise order (not guessed here).

5. Sources

  • Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
  • Distributor listing (Newark / Mouser) — search the exact part number

Źródło
  1. Eaton — E30KB155 — eaton.com

Specyfikacje

Component type
operator/collar/block
Enriched by
eaton-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
E30
Modular
true
Mouser part number
504-E30KB155
Panel cutout
30.5mm
Pn status
decoded
Rohs status
Series description
Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control)

Skrócona Instrukcja Montażu

Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

Wymiary

Rozwiązywanie Problemów

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

Zdjęcia i Rysunki

Zdjęcia: mouser.com

Skrócone Specyfikacje

Component type
operator/collar/block
Enriched by
eaton-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
E30
Modular
true