시리즈 사진: 판매자가 이를 28개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.
Emergency Stop Switches / E-Stop Switches TYPE B BTN EXTD RED EMERG STOP
연구 노트
1. What this is
E30KB155 is an Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control).
2. Part-number decode
- Series: E30
- Panel cutout: 30.5mm
- Type: operator/collar/block
- Construction: modular (operator, contact block(s), and mounting are separate parts)
3. Compatibility & ordering
Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. As an M22/E30 modular device, the operator/actuator, the contact or LED block(s), and the mounting adapter are ordered separately — a common ordering error is assuming a stored contact is included. Confirm you have all the pieces for a complete device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.
4. Data-quality note
The Eaton series, size, and component type are decoded from the part number (grounded in Eaton's Vol.7 catalog and distributor listings). The exact color and contact arrangement depend on the remaining digits and the sub-family — confirm against the Eaton datasheet for a precise order (not guessed here).
5. Sources
- Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
- Distributor listing (Newark / Mouser) — search the exact part number
출처
- Eaton — E30KB155 — eaton.com
사양 목록
|
Component type
|
operator/collar/block
|
|
Enriched by
|
eaton-decoder-2026-08-12
|
|
Lead time
|
0 Days
|
|
Manufacturer series
|
E30
|
|
Modular
|
true
|
|
Mouser part number
|
504-E30KB155
|
|
Panel cutout
|
30.5mm
|
|
Pn status
|
decoded
|
|
Rohs status
|
|
|
Series description
|
Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control)
|
설치 빠른 참조
Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
외형 치수
문제 해결
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
주요 사양
- Component type
- operator/collar/block
- Enriched by
- eaton-decoder-2026-08-12
- Lead time
- 0 Days
- Manufacturer series
- E30
- Modular
- true