WXKG11LM-T1
AktywnyMini Switch T1 Zigbee Wireless Button
Ultra-compact Zigbee 3.0 wireless smart button from Aqara. Supports single, double, long press, and triple-click gestures. Native Apple HomeKit support alongside Alexa and Google Home integration.
Typowe Zastosowania
A tiny wireless button for smart home control with extensive multi-press gesture support. Triple-click gesture enables four distinct automations from one button. Native HomeKit support makes it a favorite among Apple ecosystem users. Mount with adhesive or magnetically place anywhere.
Otwartość i Modyfikowalność
Excellent Zigbee2MQTT/ZHA support. Works without Aqara Hub. Full multi-click events in Home Assistant.
Specyfikacje
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
2 years (typical)
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2032
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
FCC, CE, Zigbee Alliance, MFi (HomeKit)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Dimensions
|
41mm x 41mm x 10.2mm
|
|
Gestures
|
Single press, double press, long press, triple click
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
HomeKit, Alexa, Google Home, Home Assistant
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
50°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-10°C
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
|
Wireless Range
Maximum wireless range in open air. Walls and interference reduce this significantly.
|
30m (indoor via Zigbee mesh)
|
|
Waterproof rating
|
Not waterproof (indoor use)
|
|
Weight
|
12g
|
Specyfikacje z tą ikoną są powiązane z oryginalną stroną źródłową producenta
Kompatybilne Alternatywy
Te produkty to funkcjonalnie równoważne odnośniki krzyżowe od innych producentów.
Skrócona Instrukcja Montażu
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 battery. Expected life: 2 years (typical). Low battery notification via the app.
Wymiary
Rozwiązywanie Problemów
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Gdzie Kupić
Skrócone Specyfikacje
- Battery Life
- 2 years (typical)
- Battery Type
- CR2032
- Certifications
- FCC, CE, Zigbee Alliance, MFi (HomeKit)
- Color
- White
- Dimensions
- 41mm x 41mm x 10.2mm
Co Mówią Użytkownicy
“Works well with Home Assistant and other platforms. Battery life is as advertised. The form factor is compact enough to place anywhere without looking out of place.”
Dowiedz się Więcej
Źródła Danych
Specyfikacje i dane produktowe pochodzą z poniższych źródeł.
WXKG11LM-T1 Product Page
https://www.aqara.com/en/product/wireless-mini-switch-t1/
Data dostępu: April 04, 2026
