1SFA619100R2072
AktywnyABB CP1-20G-11 Compact Green Pushbutton 1NO+1NC
ABB CP compact 2-button start/stop control station.
Typowe Zastosowania
ABB compact enclosed start/stop. Slimmer profile than competitors. Same 22mm mounting internally.
Notatki Badawcze
1. Overview
The ABB CP1-20G-11 (order code 1SFA619100R2072) is a single 22 mm compact pushbutton from ABB's CP1 "Compact" series — green, non-illuminated, with a 1 NO + 1 NC contact block (the trailing "11" = contact config). It's a complete one-piece operator (actuator + holder + contacts) for general machine/panel control. (Data-quality note: this was cataloged as a "CP 2-Button Start/Stop Station Enclosed" (green + red) — it is a single green CP1 pushbutton, not a two-button enclosed station. The 1SFA619100Rxxxx codes are individual CP1 pushbuttons, not enclosed stations.)
2. User Sentiment
The CP1 Compact line is valued as an inexpensive, all-in-one 22 mm pushbutton (no separate contact block to order) that's quick to panel-mount and reliable for general duty, with broad distributor stock. As a compact plastic-bezel button it's specified for standard control panels rather than heavy-duty/vandal environments.
3. Real-World Applications
A green (start/on/run) compact pushbutton on machines and control panels; the 1 NO + 1 NC block lets it energize one circuit and interrupt another (or drive a PLC input plus an indicator) from a single press.
4. Technical Specifications
- Type: ABB CP1 Compact single pushbutton, 22 mm (not a station)
- Order code: 1SFA619100R2072 → CP1-20G-11
- Color: green; non-illuminated
- Contacts: 1 NO + 1 NC
- Cutout: 22 mm
- Sealing: IP66
- Approvals: UL, CSA, CE
5. Ordering & Compatibility
Stocked by ABB distributors (Mouser/RS/etc.). Fits standard 22 mm cutouts. Related CP1 codes differ by actuator style/color/contacts (e.g. CP1-10G-11 = 1SFA619100R1072, #387). For an actual 2-button start/stop station, order an ABB enclosed control-station product — not this single CP1 pushbutton.
6. Known Issues / DQ
- DQ: it's a single green CP1 pushbutton (CP1-20G-11), not a 2-button green/red enclosed start/stop station. Corrected here (device type + color). Contact 1 NO + 1 NC is correct.
- Practical care: confirm the CP1 actuator style and contact config from the exact type code, the 22 mm cutout, and that a compact plastic-bezel button suits the environment.
Źródło
- ABB CP1-20G-11 green pushbutton (1SFA619100R2072) — new.abb.com
- ABB CP1-20G-11 Pushbutton 1SFA619100R2072 — quadindustry.com
Specyfikacje
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green (single pushbutton)
|
|
Contact Configuration
1NO + 1NC: One circuit closes and one opens when pressed. Common for start buttons that also signal 'running' state.
|
1NO + 1NC
|
|
Device type
|
Single CP1 compact pushbutton (NOT a 2-button station)
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
22mm panel cutout
|
|
Pn note
|
1SFA619100R2072 = ABB CP1-20G-11 single GREEN compact pushbutton, 1NO+1NC (quadindustry/ABB). Was mislabeled as a 2-button green/red enclosed start/stop station. 1SFA619100Rxxxx = individual CP1 pushbuttons, not stations.
|
|
Pn status
|
mislabel-corrected
|
|
Type designation
|
CP1-20G-11
|
Skrócona Instrukcja Montażu
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Wymiary
Schemat Połączeń
Rozwiązywanie Problemów
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Gdzie Kupić
Przedział cenowy
$92.97 — $139.42
across 2 sellers in US dollars
Skrócone Specyfikacje
- Certifications
- UL, CSA, CE
- Color
- Green (single pushbutton)
- Contact Configuration
- 1NO + 1NC
- Device type
- Single CP1 compact pushbutton (NOT a 2-button station)
- IP Rating
- IP66
Co Mówią Użytkownicy
“ABB compact enclosed start/stop. Slimmer profile than competitors. Same 22mm mounting internally.”
Dowiedz się Więcej
Objaśnienie Klasyfikacji IP
Co oznaczają IP65, IP66, IP67, IP69K dla Państwa zastosowania
Przewodnik 22mm vs 30mm
Jakiego rozmiaru otworu montażowego potrzebujesz?
Bloki Styków: NO vs NC
Jak wybrać i podłączyć bloki styków
Narzędzie Wyszukiwania Przycisków
Znajdź właściwy przycisk wg typu, rozmiaru i koloru