Giovenzana · PLB 시리즈

PLB08K

현행 제품
CE IEC 60947-5-1

PLB08 Crane Pendant 8-Button Station

Giovenzana PLB 시리즈 Introduced circa 1985

Giovenzana PLB08 8-button pendant with 2-speed and e-stop.

일반적인 용도

8-button pendant for 2-speed crane operation. Each direction has two buttons — tap for slow, press deeper for fast. Includes integrated e-stop mushroom. The standard for cranes with variable speed or 2-speed motors.

연구 노트

1. Overview

The Giovenzana PLB08K is an 8-button pendant control station from Giovenzana's PLB hanging pendant line, used to operate overhead cranes, hoists, and winches. It's a handheld yellow polycarbonate enclosure with eight momentary function buttons plus an emergency-stop element (the catalog contact set is 8× 1NO + 1NC, the NC for the E-stop). Rated IP65 and built to IEC 60947-5-1, it's the larger sibling of the 6-button PLB06 — the extra buttons cover additional crane axes/functions (e.g. two-axis motion plus auxiliaries, or dual-speed steps).

2. User Sentiment

Like the rest of the PLB line, valued as a rugged, cost-effective European crane pendant — robust polycarbonate shell, IP65 sealing, ergonomic grip, and field-serviceable modular elements. The 8-button size with integrated E-stop suits multi-function crane control. Practical considerations are the same as any pendant: correct button/function layout, single- vs dual-speed wiring, strain-relief on the pendant cable, and confirming the E-stop meets the machine's safety requirement.

3. Real-World Applications

Handheld control of overhead traveling cranes, hoists, and winches needing more functions than a 6-button unit — e.g. two-axis travel plus hoist plus auxiliary/dual-speed, with an emergency stop always at hand.

4. Technical Specifications

  • Type: Pendant push-button control station, 8 buttons + E-stop, momentary
  • Application: crane / hoist / winch control
  • Contacts: 8× 1 NO (function) + 1 NC (emergency stop)
  • Housing: polycarbonate, yellow
  • Sealing: IP65
  • Standard: IEC 60947-5-1; CE
  • Options: single- or dual-speed layouts; strain-relief per configuration

5. Ordering & Compatibility

Giovenzana PLB series; PLB08 denotes the 8-button size. Stocked by industrial distributors (Galco, Radwell, etc.). Confirm single- vs dual-speed configuration, the exact function layout, E-stop type, and cable-entry/strain-relief when ordering. Uses Giovenzana PLB modular actuators/contact blocks.

6. Known Issues

No notable reliability issues. Practical care: verify the button function map and speed configuration (single vs dual-speed changes wiring/contacts), ensure proper strain relief on the pendant cable, and confirm the E-stop rating/category suits the crane's safety needs.


출처
  1. Giovenzana PLB pendant control station — 8 holes for crane — giovenzana.com
  2. Giovenzana PLB08K 8-button pendant station — galco.com

사양 목록

Application
Crane/hoist/winch pendant control
Certifications
CE, IEC 60947-5-1
Color
Yellow housing
Config note
8 function buttons + E-stop; single- or dual-speed variants; verify layout/strain-relief per order
Contact Configuration
8x 1NO + 1NC (e-stop)
IP Rating
IP65
Material
Polycarbonate

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

배선도

11 12 NO 21 22 NC

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

구매처

가격 범위

$38.1 — $56.47

across 2 sellers in US dollars

주요 사양

Application
Crane/hoist/winch pendant control
Certifications
CE, IEC 60947-5-1
Color
Yellow housing
Config note
8 function buttons + E-stop; single- or dual-speed variants; verify layout/strain-relief per order
Contact Configuration
8x 1NO + 1NC (e-stop)

사용자 후기

+

“8-button pendant for 2-speed crane operation. Each direction has two buttons — tap for slow, press deeper for fast. Includes integrated e-stop mushroom. The standard for cranes with variable speed or ”

Reddit r/PLC 40 추천 스레드 보기 →