PLB08K
ActifPLB08 Crane Pendant 8-Button Station
Giovenzana PLB08 8-button pendant with 2-speed and e-stop.
Applications courantes
8-button pendant for 2-speed crane operation. Each direction has two buttons — tap for slow, press deeper for fast. Includes integrated e-stop mushroom. The standard for cranes with variable speed or 2-speed motors.
Notes de Recherche
1. Overview
The Giovenzana PLB08K is an 8-button pendant control station from Giovenzana's PLB hanging pendant line, used to operate overhead cranes, hoists, and winches. It's a handheld yellow polycarbonate enclosure with eight momentary function buttons plus an emergency-stop element (the catalog contact set is 8× 1NO + 1NC, the NC for the E-stop). Rated IP65 and built to IEC 60947-5-1, it's the larger sibling of the 6-button PLB06 — the extra buttons cover additional crane axes/functions (e.g. two-axis motion plus auxiliaries, or dual-speed steps).
2. User Sentiment
Like the rest of the PLB line, valued as a rugged, cost-effective European crane pendant — robust polycarbonate shell, IP65 sealing, ergonomic grip, and field-serviceable modular elements. The 8-button size with integrated E-stop suits multi-function crane control. Practical considerations are the same as any pendant: correct button/function layout, single- vs dual-speed wiring, strain-relief on the pendant cable, and confirming the E-stop meets the machine's safety requirement.
3. Real-World Applications
Handheld control of overhead traveling cranes, hoists, and winches needing more functions than a 6-button unit — e.g. two-axis travel plus hoist plus auxiliary/dual-speed, with an emergency stop always at hand.
4. Technical Specifications
- Type: Pendant push-button control station, 8 buttons + E-stop, momentary
- Application: crane / hoist / winch control
- Contacts: 8× 1 NO (function) + 1 NC (emergency stop)
- Housing: polycarbonate, yellow
- Sealing: IP65
- Standard: IEC 60947-5-1; CE
- Options: single- or dual-speed layouts; strain-relief per configuration
5. Ordering & Compatibility
Giovenzana PLB series; PLB08 denotes the 8-button size. Stocked by industrial distributors (Galco, Radwell, etc.). Confirm single- vs dual-speed configuration, the exact function layout, E-stop type, and cable-entry/strain-relief when ordering. Uses Giovenzana PLB modular actuators/contact blocks.
6. Known Issues
No notable reliability issues. Practical care: verify the button function map and speed configuration (single vs dual-speed changes wiring/contacts), ensure proper strain relief on the pendant cable, and confirm the E-stop rating/category suits the crane's safety needs.
Source
- Giovenzana PLB pendant control station — 8 holes for crane — giovenzana.com
- Giovenzana PLB08K 8-button pendant station — galco.com
Spécifications
|
Application
|
Crane/hoist/winch pendant control
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE, IEC 60947-5-1
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Yellow housing
|
|
Config note
|
8 function buttons + E-stop; single- or dual-speed variants; verify layout/strain-relief per order
|
|
Contact Configuration
1NO + 1NC: One circuit closes and one opens when pressed. Common for start buttons that also signal 'running' state.
|
8x 1NO + 1NC (e-stop)
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Polycarbonate
|
Référence rapide d'installation
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Schéma de câblage
Dépannage
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Où acheter
Fourchette de prix
$38.1 — $56.47
across 2 sellers in US dollars
Spécifications rapides
- Application
- Crane/hoist/winch pendant control
- Certifications
- CE, IEC 60947-5-1
- Color
- Yellow housing
- Config note
- 8 function buttons + E-stop; single- or dual-speed variants; verify layout/strain-relief per order
- Contact Configuration
- 8x 1NO + 1NC (e-stop)
Ce qu'en disent les utilisateurs
“8-button pendant for 2-speed crane operation. Each direction has two buttons — tap for slow, press deeper for fast. Includes integrated e-stop mushroom. The standard for cranes with variable speed or ”
En savoir plus
Indices de protection IP expliqués
Ce que signifient IP65, IP66, IP67, IP69K pour votre application
Guide 22mm vs 30mm
Quelle taille de découpe de panneau vous faut-il ?
Blocs de contact : NO vs NC
Comment choisir et câbler les blocs de contact
Outil de recherche de boutons
Trouvez le bon bouton par type, taille et couleur