BACO Controls · L21 시리즈

L21AA04

현행 제품
CE

BACO 22mm Red Flush Push Button 1NC

BACO Controls L21 시리즈 Introduced circa 2000

BACO L21 red push button.

일반적인 용도

Budget red stop button. Same 22mm standard.

사양 목록

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
22mm
IP Rating
IP65

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

배선도

L T 21 22 NC (closed) opens on press

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

구매처

가격 범위

$44.52 — $87.46

2개 대리점

주요 사양

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
22mm

사용자 후기

+

“Budget red stop button. Same 22mm standard.”

Reddit r/PLC 50 추천 스레드 보기 →