L21AA04
AttivoBACO 22mm Yellow Flush Push Button (chrome bezel)
BACO L21 red push button.
Applicazioni Comuni
Budget red stop button. Same 22mm standard.
Note di Ricerca
1. Overview
The BACO L21AA04 is a 22 mm yellow flush momentary pushbutton with a chrome (metal) bezel, from BACO Controls' L21 modular 22 mm control-device line. Flush actuator, spring-return (momentary), IP65, CE-marked — a standard industrial panel pushbutton. (Data-quality note: this was cataloged as "red"; distributor data (Baco catalog / OnlineComponents) lists L21AA04 as yellow. The sibling L21AA03 is black. The BACO L21AAxx color codes were mis-decoded in the catalog — see flag. The stored contact "1NC" is also atypical for a yellow momentary (usually 1NO) and should be verified.)
2. User Sentiment
BACO Controls is a value option in 22 mm pilot-device panels — metal-bezel build and standard modular contact blocks at competitive prices. Little review sentiment as a basic pushbutton; the practical points are confirming color and contact from the exact code (BACO coding is easy to mis-read) and matching the contact block to the intended function.
3. Real-World Applications
General-purpose panel pushbutton; yellow is typically used for return/reset/attention or auxiliary functions (per IEC 60204 colour conventions), distinct from green (start) and red (stop). Machine and control-panel duty.
4. Technical Specifications
- Type: 22 mm flush momentary pushbutton (complete)
- Bezel: chrome (metal)
- Color: yellow
- Actuator: flush, momentary (spring-return)
- Contacts: verify — stored 1NC is atypical for a yellow momentary (yellow momentary is usually 1NO); confirm from the BACO datasheet
- Cutout: 22 mm
- Sealing: IP65
- Approvals: CE
5. Ordering & Compatibility
BACO Controls L21 series; fits standard 22 mm cutouts. Stocked by industrial distributors. Confirm the exact color and contact from the part code before ordering — for this line, AA03 = black, AA04 = yellow; contact blocks are modular.
6. Known Issues
No reliability concerns for the line. The catalog-relevant issue is BACO color-code mis-decoding (AA03 black, AA04 yellow — both were previously wrong in this catalog), and the contact configuration on these entries appears unreliable and should be checked against the datasheet.
Fonte
- BACO L21AA04 — 22mm Yellow Flush Momentary Pushbutton — onlinecomponents.com
- BACO Controls L21 22mm pushbuttons (yellow flush) — bacocontrols.com
Specifiche
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Yellow
|
|
Contact Configuration
1NO + 1NC: One circuit closes and one opens when pressed. Common for start buttons that also signal 'running' state.
|
1NC (VERIFY — atypical for a yellow momentary; usually 1NO)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Chrome (metal) bezel
|
|
Pn note
|
Color corrected Red->Yellow per distributor data (L21AA04 = 22mm yellow flush momentary chrome bezel). BACO L21AAxx color codes were mis-decoded in catalog (AA03=black not green, AA04=yellow not red). Contact config also suspect — verify from datasheet.
|
|
Pn status
|
color-corrected
|
Guida Rapida all'Installazione
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensioni
Schema di Cablaggio
Risoluzione dei Problemi
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Dove Acquistare
Fascia di prezzo
$44.52 — $87.46
across 2 sellers in US dollars
Specifiche Rapide
- Actuator Type
- Flush
- Certifications
- CE
- Color
- Yellow
- Contact Configuration
- 1NC (VERIFY — atypical for a yellow momentary; usually 1NO)
- Cutout Diameter
- 22mm
Cosa Dicono gli Utenti
“Budget red stop button. Same 22mm standard.”
Approfondisci
Classificazioni IP Spiegate
Cosa significano IP65, IP66, IP67, IP69K per la Sua applicazione
Guida 22mm vs 30mm
Quale dimensione del foro pannello Le serve?
Blocchi Contatti: NO vs NC
Come scegliere e cablare i blocchi contatti
Strumento Trova Pulsante
Trovi il pulsante giusto per tipo, dimensione e colore