4FSH901

현행 제품

Apem 4FSH901

APEM 4FSH901 — Apem 4FSH901

시리즈 사진: 판매자가 이를 2개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Tactile Switches Asm. Cap / Extender Switch

연구 노트

1. What this is

4FSH901 is an APEM tactile switch.

2. Part-number decode

  • Series: APEM tactile
  • Type: tactile switch

3. Compatibility & ordering

APEM makes pushbuttons (incl. anti-vandal and illuminated), tactile switches, toggle switches, joysticks, and indicators for industrial and electronic equipment. Match by type, actuation, illumination, sealing (IP rating), and mounting, then use the APEM datasheet to confirm the exact contact and actuator configuration encoded in the part number.

4. Data-quality note

The APEM series and switch type are decoded from the part number (grounded in the apem.com catalog and distributor listings). The exact contact arrangement, illumination, and actuator/cap are encoded in the full order code — confirm against the APEM datasheet for a precise order (not guessed here).

5. Sources

  • APEM product catalog (apem.com)
  • Distributor listing (RS / Mouser / DigiKey) — search the exact part number

출처
  1. APEM — 4FSH901 — apem.com

사양 목록

Device class
tactile switch
Enriched by
apem-decoder-2026-08-12
Lead time
77 Days
Manufacturer series
tactile
Mouser part number
642-4FSH901
Pn status
decoded
Rohs status
RoHS Compliant
Series description
APEM tactile switch (ADTS / MJTP / #GTH/#FTH/#ETH series — PCB tact switch, through-hole or SMT, various heights and forces)

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
tactile switch
Enriched by
apem-decoder-2026-08-12
Lead time
77 Days
Manufacturer series
tactile
Mouser part number
642-4FSH901