XALK178GH7

現行品

Schneider Electric XALK178GH7

Schneider Electric XALK178GH7 — Schneider Electric XALK178GH7

シリーズ画像: 販売者は3個の他の部品にも使用しているため、この正確なバージョンが表示されない場合があります。

Emergency Stop Switches / E-Stop Switches CONTROL STN E-STOP TRIGGER ACTION

研究ノート

1. What this is

XALK178GH7 is a Schneider Electric Harmony XALK enclosed metal control station (pre-wired pushbutton/E-stop station).

2. Part-number decode

  • Series: Harmony XALK
  • Panel cutout: 22mm
  • Bezel material: Metal
  • Type: control station

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Schneider series, bezel material, size, and component type are decoded from the part number (grounded in the se.com Harmony catalog and distributor listings). The exact colour and contact arrangement are encoded in the remaining digits and depend on the sub-family — confirm against the Schneider datasheet for a precise order (not guessed here).

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

出典
  1. Schneider Electric — XALK178GH7 — se.com

仕様一覧

Bezel material
metal
Component type
control station
Enriched by
schneider-decoder-2026-08-12
Lead time
43 Days
Manufacturer series
Harmony XALK
Mouser part number
996-XALK178GH7
Panel cutout
22mm
Pn status
decoded
Wireless Range
Harmony / Square D Class 9001
Rohs status
RoHS Compliant
Series description
Schneider Harmony XALK enclosed metal control station (pre-wired pushbutton/E-stop station)

取付クイックリファレンス

Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

外形寸法

トラブルシューティング

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

写真と図面

画像: mouser.com

主要仕様

Bezel material
metal
Component type
control station
Enriched by
schneider-decoder-2026-08-12
Lead time
43 Days
Manufacturer series
Harmony XALK