A2A-4R

現行品

Omron Automation and Safety A2A-4R

Omron Automation and Safety A2A-4R — Omron Automation and Safety A2A-4R

シリーズ画像: 販売者は2個の他の部品にも使用しているため、この正確なバージョンが表示されない場合があります。

Basic / Snap Action Switches Lighted Pushbutton

研究ノート

1. What this is

A2A-4R is an Omron A2A pushbutton.

2. Part-number decode

  • Series: Omron A2A
  • Type: pushbutton

3. Compatibility & ordering

Omron makes industrial command switches (A22 22mm, A16 16mm — unitized, contact in the model code), illuminated pushbuttons/pilot lights (A3, M2), and a widely-used B3 PCB tactile-switch family. Match by size, function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement, then use the Omron datasheet to confirm the exact colour and voltage encoded in the part number.

4. Data-quality note

The exact Omron product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • Omron product catalog (omron.com / components.omron.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Verified distributor data (Mouser)

This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.


出典
  1. Omron — A2A-4R — omron.com

仕様一覧

Datasheet url
https://www.mouser.com/datasheet/3/39/1/a2a_ds_e_2_3_csm614.pdf
Device class
pushbutton
Enriched by
omron-decoder-2026-08-12
Lead time
41 Days
Manufacturer series
A2A
Mouser checked
2026-09-28
Mouser description
Basic / Snap Action Switches Lighted Pushbutton
Mouser matched
true
Mouser part number
653-A2A-4R
Pn status
verified
Rohs status
RoHS Compliant
Series description
Omron A2A-series pushbutton / command switch

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

写真と図面

画像: mouser.com

主要仕様

Datasheet url
https://www.mouser.com/datasheet/3/39/1/a2a_ds_e_2_3_csm614.pdf
Device class
pushbutton
Enriched by
omron-decoder-2026-08-12
Lead time
41 Days
Manufacturer series
A2A