M22-XDL-W-X0
現行品Eaton M22-XDL-W Illuminated Button Lens, White
Eaton M22 buzzer module — audible alarm in standard 22mm mounting.
主な用途
22mm panel-mount buzzer for audible alarms. Same M22 cutout as push buttons — installs right alongside them on the panel. 24V DC. Used for cycle complete, fault alarm, and attention signals. The visual indicator equivalent for sound.
仕様一覧
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White (translucent)
|
|
Component type
|
Button lens/cap for M22 illuminated pushbutton (passive — no LED/contacts/sounder)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
M22
|
|
Style
|
Flush; custom-etchable (-ETCH variant)
|
取付クイックリファレンス
Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
外形寸法
トラブルシューティング
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
主要仕様
- Certifications
- UL, CSA, CE
- Color
- White (translucent)
- Component type
- Button lens/cap for M22 illuminated pushbutton (passive — no LED/contacts/sounder)
- Cutout Diameter
- 22.5mm
- Series
- M22
ユーザーの声
“22mm panel-mount buzzer for audible alarms. Same M22 cutout as push buttons — installs right alongside them on the panel. 24V DC. Used for cycle complete, fault alarm, and attention signals. The visua”