M22-XDL-W-X0
AttivoEaton M22-XDL-W Illuminated Button Lens, White
Eaton M22 buzzer module — audible alarm in standard 22mm mounting.
Applicazioni Comuni
22mm panel-mount buzzer for audible alarms. Same M22 cutout as push buttons — installs right alongside them on the panel. 24V DC. Used for cycle complete, fault alarm, and attention signals. The visual indicator equivalent for sound.
Research Notes
1. Overview
The Eaton M22-XDL-W is a button lens (translucent button plate/cap) for the M22 RMQ-Titan illuminated pushbutton range — a passive white lens that snaps onto an illuminated M22 actuator so the LED element behind it shows through. It is flush, white, and can be custom-etched/marked (the ...-ETCH / custom variants add engraved symbols or text). "M22-XDL-W-X0" is a lens configuration; it carries no electronics — it is not a switch, indicator, or buzzer. (The catalog's "Buzzer Module / 24V" label is incorrect: this part has no voltage or sounder.)
2. User Sentiment
As a small accessory it isn't reviewed, but the M22 lens/legend system is well-regarded for letting integrators build labeled, illuminated controls (start/stop, custom symbols) that stay legible and sealed. The practical note is simply matching the lens to the correct illuminated actuator + LED element, and choosing plain vs custom-etched.
3. Real-World Applications
Fitted to M22 illuminated pushbuttons on control panels to provide a colored/etched illuminated legend — start/run indications, custom machine functions, and labeled controls where a backlit symbol improves visibility.
4. Technical Specifications
- Type: Button lens / cap for M22 illuminated pushbutton (passive component — no contacts, no LED, no sounder)
- Color: White (translucent, for backlighting)
- Style: Flush; custom-etchable variants available (M22-XDL-W-ETCH)
- Fits: 22.5 mm M22 RMQ-Titan illuminated actuators
- Sealing (assembled): IP67 / IP69K / NEMA 4X with the actuator
- Approvals: per the built-up device (UL/CSA/CE)
5. Ordering & Compatibility
Order together with an M22 illuminated pushbutton actuator (e.g. M22-DL-W) + LED element (M22-LED-W / M22-LED230-W) + contact block — the lens alone does nothing. Custom-marked versions carry an -ETCH/custom suffix. Sold by Eaton and general electrical distributors.
6. Known Issues
No reliability issues — it is a molded plastic lens. The only "issue" is catalog confusion: it is a lens accessory, not a complete illuminated button, indicator, or buzzer; it must be combined with an actuator + LED to function.
2 sources
Specifiche
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White (translucent)
|
|
Component type
|
Button lens/cap for M22 illuminated pushbutton (passive — no LED/contacts/sounder)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
M22
|
|
Style
|
Flush; custom-etchable (-ETCH variant)
|
Guida Rapida all'Installazione
Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensioni
Risoluzione dei Problemi
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Dove Acquistare
Fascia di prezzo
$129.99 — $131.65
presso 2 distributori
Specifiche Rapide
- Certifications
- UL, CSA, CE
- Color
- White (translucent)
- Component type
- Button lens/cap for M22 illuminated pushbutton (passive — no LED/contacts/sounder)
- Cutout Diameter
- 22.5mm
- Series
- M22
Cosa Dicono gli Utenti
“22mm panel-mount buzzer for audible alarms. Same M22 cutout as push buttons — installs right alongside them on the panel. 24V DC. Used for cycle complete, fault alarm, and attention signals. The visua”
Approfondisci
Classificazioni IP Spiegate
Cosa significano IP65, IP66, IP67, IP69K per la Sua applicazione
Guida 22mm vs 30mm
Quale dimensione del foro pannello Le serve?
Blocchi Contatti: NO vs NC
Come scegliere e cablare i blocchi contatti
Strumento Trova Pulsante
Trovi il pulsante giusto per tipo, dimensione e colore