Eaton · M22 シリーズ

M22-DH-R

現行品
UL CSA CE

22mm Red Extended Push Button M22

型番: M22 - R
Eaton M22 シリーズ Introduced circa 2000

Eaton M22 extended red push button.

主な用途

Extended red for accessible stop. Raised above panel surface for easy pressing with gloves or without direct line of sight.

仕様一覧

Actuator Type
Extended
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22.5mm
IP Rating
IP67 (front)
Series
M22

取付クイックリファレンス

Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

Front 22.5mm cutout panel hole diameter Side panel contact ~45mm depth

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

主要仕様

Actuator Type
Extended
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22.5mm
IP Rating
IP67 (front)

ユーザーの声

+

“Extended red for accessible stop. Raised above panel surface for easy pressing with gloves or without direct line of sight.”

Reddit r/PLC 29 高評価 スレッドを見る →