Eaton · M22 Řada

M22-DH-R

Aktivní
UL CSA CE

22mm Red Extended Push Button M22

Katalogové číslo: M22 - R
Eaton M22 Řada Introduced circa 2000

Eaton M22 extended red push button.

Běžné aplikace

Extended red for accessible stop. Raised above panel surface for easy pressing with gloves or without direct line of sight.

Specifikace

Actuator Type
Extended
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22.5mm
IP Rating
IP67 (front)
Series
M22

Stručný průvodce instalací

Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Rozměry

Front 22.5mm cutout panel hole diameter Side panel contact ~45mm depth

Řešení problémů

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Stručné specifikace

Actuator Type
Extended
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22.5mm
IP Rating
IP67 (front)

Co říkají uživatelé

+

“Extended red for accessible stop. Raised above panel surface for easy pressing with gloves or without direct line of sight.”

Reddit r/PLC 29 hlasů Zobrazit vlákno →