FB1W-XW1E-BV511MR

Attivo

IDEC FB1W-XW1E-BV511MR

Codice articolo: R
IDEC FB1W-XW1E-BV511MR — IDEC FB1W-XW1E-BV511MR

Emergency Stop Switches / E-Stop Switches Enclosure Box Emergency-Stop

Specifiche

Color
Red
Device class
guard/cover
Enriched by
idec-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
FB
Modular
false
Mouser part number
199-FB1WXW1EBV511MR
Panel cutout
22mm
Pn status
decoded-partial
Rohs status
Series description
IDEC FB-series protective guard / full-cover accessory fitted over a 22mm HW/XW/XN operator (the trailing HW1B/HW4B/XW1E token names the operator it protects)

Guida Rapida all'Installazione

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensioni

Risoluzione dei Problemi

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Dove Acquistare

Fascia di prezzo

$76.13 — $76.13

presso 1 distributori

Specifiche Rapide

Color
Red
Device class
guard/cover
Enriched by
idec-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
FB